If there is any of you that have not replaced your cct's yet I highly recommend it!!!!!!!!! Mine broke last week, the piston hit the valve and bent it. To make a long story short $1100........**** MEEEEEEEEEEEEEEEEEE maybe a whole rebuild if there is metal shavings in the cylinder.

 

Thanks for the heads up...I did mine last week because I thought they were going out well it turns out they work fine, but I changed them for piece of mind...Thanks Again Trucknduc https://www.superhawkforum.com/forum...ad.php?t=17585 CCT's good quality

 

Sorry to hear about your CCT failure

What year is your bike, and how many miles?

 

1998 with 21000 miles

 

Thanks for the reply. I've got an '05, but with 27,000 miles.

 

Hope your rebuild goes well and not as bad as your might think.



i still cannot understand why owners do not replace the piece of crap stock CCT's. Why even change your oil if you don't care enough to put in some manual CCT's


I guess it is a risk factor and some just want to take the risk.

 

Rather than rebuild, you might consider this:
http://cgi.ebay.com/ebaymotors/ws/eB...1123&viewitem=