recommendation!!!!!
#1
recommendation!!!!!
If there is any of you that have not replaced your cct's yet I highly recommend it!!!!!!!!! Mine broke last week, the piston hit the valve and bent it. To make a long story short $1100........**** MEEEEEEEEEEEEEEEEEE maybe a whole rebuild if there is metal shavings in the cylinder.
#2
Thanks for the heads up...I did mine last week because I thought they were going out well it turns out they work fine, but I changed them for piece of mind...Thanks Again Trucknduc https://www.superhawkforum.com/forum...ad.php?t=17585 CCT's good quality
#6
Hope your rebuild goes well and not as bad as your might think.
i still cannot understand why owners do not replace the piece of crap stock CCT's. Why even change your oil if you don't care enough to put in some manual CCT's
I guess it is a risk factor and some just want to take the risk.
i still cannot understand why owners do not replace the piece of crap stock CCT's. Why even change your oil if you don't care enough to put in some manual CCT's
I guess it is a risk factor and some just want to take the risk.
#7
Rather than rebuild, you might consider this:
http://cgi.ebay.com/ebaymotors/ws/eB...1123&viewitem=
http://cgi.ebay.com/ebaymotors/ws/eB...1123&viewitem=
Thread
Thread Starter
Forum
Replies
Last Post