Bafflectomy!!!!

Reply Subscribe

Thread Tools

Search this Thread

06-06-2009, 08:07 PM

#31

Gregw

Senior Member

SuperBike

Join Date: Jun 2007

Location: Los Angeles ish

Posts: 1,031

Quote:

Originally Posted by merlyn

I have a problem!I ve make the bafflectomy with 4 holes each not 8 and now my bike is running hotter!What should I do_?

I wonder if your running a little lean in the jetting now. That could raise the temp.

06-07-2009, 05:48 AM

#32

merlyn

Member

Squid

Join Date: Apr 2009

Location: Galati, Romania

Posts: 76

what should I do to adjust this?

06-07-2009, 06:29 AM

#33

nath981

Senior Member

MotoGP

Join Date: Aug 2006

Location: altoona, pa

Posts: 2,934

Quote:

Originally Posted by merlyn

what should I do to adjust this?

no disrespect intended merlyn, but you need to provide more information. Is there someone who can help you with this? drilling a couple holes is not likely going to cause "running hot" unless you drilled them in the radiators.

06-07-2009, 06:58 AM

#34

merlyn

Member

Squid

Join Date: Apr 2009

Location: Galati, Romania

Posts: 76

after I ve drilled the holes I ve observed that when I run my bike in the city traffic conditions the temperature is always after the middle a bit

06-07-2009, 07:37 AM

#35

nath981

Senior Member

MotoGP

Join Date: Aug 2006

Location: altoona, pa

Posts: 2,934

Quote:

Originally Posted by merlyn

after I ve drilled the holes I ve observed that when I run my bike in the city traffic conditions the temperature is always after the middle a bit

Hell, that's normal> don't worry about it if you checked all the other stuff i cited previously. grow some *****! Take the whole rear baffle out, that is, cut the whole center out. The sound is glorious and it won't hurt a dam thing. then you'll find out for sure that you're not going to overheat. If you run good synthetic oil, heat is not a problem. you can run well over 200 degrees and never hurt anything.