WTB - HRC Ignition Module ICM for VTR1000F
#1
WTB - HRC Ignition Module ICM for VTR1000F
Howdy,
I am looking for the HRC Ignition Module as my current ICM s leaking/faulty. Any help greatly appreciated.
Also in search of the following:-
2. '05 fuel tank in 19 litres hopefully mint condition;
3. '05 speedometer;
4. '94 VFR750 handlebars;
5. ***found***.;
6. hi-mount stainless steel headers to match my Remus Rev cans
I am looking for the HRC Ignition Module as my current ICM s leaking/faulty. Any help greatly appreciated.
Also in search of the following:-
2. '05 fuel tank in 19 litres hopefully mint condition;
3. '05 speedometer;
4. '94 VFR750 handlebars;
5. ***found***.;
6. hi-mount stainless steel headers to match my Remus Rev cans
Last edited by ae29; 05-10-2017 at 02:16 AM.
#3
they come up on jauce.com from time to time.
Here is another possible option: HONDA VTR1000F MOTOBUM Racing Igniter yyy | eBay
Here is another possible option: HONDA VTR1000F MOTOBUM Racing Igniter yyy | eBay
#4
19L fuel tank-good luck. Keep your eyes peeled on ebay.co.uk
05 speedo- Ebay is again a good bet. There are currently about 7 earliers ones on there. A quick search doesn't currently show a later for sale, but I'm sure they'll pop up too from time to time as someone parts a bike out.
VFR750 handlebars. Again saw a bunch of them on Ebay
What's a "modded" R1 R/R? You just buy the mosfet R/R (R1, etc) and Eastern Beaver sells what you need to fit it up to the Superhawk. Believe they also sell brand new R/R's as well.
Do you mean high mount midpipes/link pipes? Remus high mount slip ons for a Suprhawk were one piece (midpipes and mufflers did not separate). So you'll need to come up with a set of high mount midpipes (which basically no one makes anymore) that fit whatever diameter/style of mufflers you have. I believe Remus Revolutions use two springs so a pair of high mount midpipes from Two Brothers would work as long as the diameter where is fits into the muffler is correct (or you can mod it to fit). Good luck finding a pair... You'll also need high mount hangers.
Sorry for all the "good lucks" but some of the stuff I have hoarded away has taken YEARS of searching to find as most of this stuff is no longer available new.
05 speedo- Ebay is again a good bet. There are currently about 7 earliers ones on there. A quick search doesn't currently show a later for sale, but I'm sure they'll pop up too from time to time as someone parts a bike out.
VFR750 handlebars. Again saw a bunch of them on Ebay
What's a "modded" R1 R/R? You just buy the mosfet R/R (R1, etc) and Eastern Beaver sells what you need to fit it up to the Superhawk. Believe they also sell brand new R/R's as well.
Do you mean high mount midpipes/link pipes? Remus high mount slip ons for a Suprhawk were one piece (midpipes and mufflers did not separate). So you'll need to come up with a set of high mount midpipes (which basically no one makes anymore) that fit whatever diameter/style of mufflers you have. I believe Remus Revolutions use two springs so a pair of high mount midpipes from Two Brothers would work as long as the diameter where is fits into the muffler is correct (or you can mod it to fit). Good luck finding a pair... You'll also need high mount hangers.
Sorry for all the "good lucks" but some of the stuff I have hoarded away has taken YEARS of searching to find as most of this stuff is no longer available new.
Last edited by captainchaos; 05-09-2017 at 10:23 PM.
#5
You might be money, time and function ahead going this route.
http://www.ignitech.cz/old/english/tcip/tcip.htm
Last edited by xeris; 05-10-2017 at 06:28 AM. Reason: Add link
Thread
Thread Starter
Forum
Replies
Last Post