Technical Discussion Topics related to Technical Issues

strange noise..a have a few questions

Thread Tools
 
Search this Thread
 
Old Apr 3, 2009 | 11:51 PM
  #1  
merlyn's Avatar
Thread Starter
Member
Squid
 
Joined: Apr 2009
Posts: 76
From: Galati, Romania
merlyn is on a distinguished road
strange noise..a have a few questions

hello ..I have a problem ...when I run my engine at neutral it makes a strange noise ...when I tight the clutch lever the noise dissapear...my vtr is a red one from 98 with 19k miles on the clock...sorry for my english I m from Romania

it is the CCT_?but the noise dissapear!

i use 10w 40 motul 7100 full syntetique double ester oil it is ok?... I change it every 3k miles

when I change the gear from 1 to 2 it makes a clunk noise ...like when I put in the first gear

I put a BMC race air filter on it ...it is ok?

thank you...with respect Andrew
Old Apr 4, 2009 | 12:07 AM
  #2  
inderocker's Avatar
Moderator
MotoGP
 
Joined: May 2005
Posts: 2,708
inderocker is an unknown quantity at this point
It's just the clutch, don't worry about it. The clunk from first to second is normal as well.
Old Apr 4, 2009 | 12:08 AM
  #3  
merlyn's Avatar
Thread Starter
Member
Squid
 
Joined: Apr 2009
Posts: 76
From: Galati, Romania
merlyn is on a distinguished road
thank you!
Old Apr 5, 2009 | 03:09 PM
  #4  
oneup1982's Avatar
RubberRoaster
Squid
 
Joined: Sep 2008
Posts: 26
From: PHX
oneup1982 is on a distinguished road
A little tip for noises.... TURN UP YOUR IPOD~! They don't exist if you can't hear them.
Old Apr 6, 2009 | 12:59 AM
  #5  
merlyn's Avatar
Thread Starter
Member
Squid
 
Joined: Apr 2009
Posts: 76
From: Galati, Romania
merlyn is on a distinguished road
ha ha ha funy...the problem is I love to listen the engine sound
Old Apr 6, 2009 | 01:29 AM
  #6  
RK1's Avatar
RK1
Senior Member
MotoGP
 
Joined: Aug 2007
Posts: 2,547
From: Way Out West
RK1 is on a distinguished road
Not sure about the noise but it isn't the CCTs.

Shift from 1 to 2 makes more noise than other shifts. As long as you get positive engagement I wouldn't worry about it.

BMC race filter? I tried one on my VTR and no matter how I changed the jetting it ran poorly at low rpm. I went back to the Honda filter. If your bike runs OK with the BMC I wouldn't worry about it.

No need to apologize for your English. It's much better than our Romanian.
Old Apr 6, 2009 | 03:51 PM
  #7  
merlyn's Avatar
Thread Starter
Member
Squid
 
Joined: Apr 2009
Posts: 76
From: Galati, Romania
merlyn is on a distinguished road
Thank you RK1 ! In my opinion it is ok with the BMC air filter! The acceleration time response is much better in my case!When I changed the stock filter with BMC I went to the service and make a carb syncronisation!!>))
Old Apr 12, 2009 | 12:20 AM
  #8  
Circuit_Burner's Avatar
guru of things sparky
SuperSport
 
Joined: Oct 2008
Posts: 599
From: Grand Prairie , Texas
Circuit_Burner is on a distinguished road
Noise dissapearing when the clutch lever has pressure would indicate the pilot bearing is worn.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
merlyn
Technical Discussion
14
Apr 7, 2010 02:53 PM
98greenchicken
Technical Discussion
4
Sep 18, 2007 05:33 PM
hazzy
Technical Discussion
2
Aug 26, 2007 07:50 PM
Otto Man
Technical Discussion
5
Jan 17, 2007 06:47 PM
F1 Fan in Nascar Land
General Discussion
4
Mar 24, 2006 08:15 PM




All times are GMT -7. The time now is 03:27 AM.