Help I have wheels from??
#1
Help I have wheels from??
O.K flebay strikes again! About 6 months ago I bought chrome rims off Ebay, add said: "chromed rims from 99 superhawk never mounted". I received them looked them over for damage and set them aside. this weekend I decided to mount them... Well there NOT superhawk rims. Both rims use larger bearings, the front needs rotors with a larger center hole and I think the rotor bolt pattern is slightly larger. Also the rear needs a 6 bolt rotor. These are just the differences that became apparent with a fairly quick second look.
The real problem here is of the thousands of bikes out there, all I know is they are not superhawk wheels. They have the same appearance as stock wheels, but all the casting identifications where ground off to prep for chrome. Looking for help to identify what they came from. Then I can see if mounting is possible, or at least sell them to someone who can use them. Thanks guys, any help here would be greatly appreciated.
The real problem here is of the thousands of bikes out there, all I know is they are not superhawk wheels. They have the same appearance as stock wheels, but all the casting identifications where ground off to prep for chrome. Looking for help to identify what they came from. Then I can see if mounting is possible, or at least sell them to someone who can use them. Thanks guys, any help here would be greatly appreciated.
#3
I bet they are for a VTR1000 SP1\SP2 or a RC51
Well I guess I should read your whole post. If they have 3 spokes then maybe 954 or 1000 wheels
Well I guess I should read your whole post. If they have 3 spokes then maybe 954 or 1000 wheels
Last edited by 8541Hawk; 04-11-2010 at 06:13 PM.
#8
After hours looking for a Honda rear rim with a six bolt rotor, I found CBR1100xx looks the same. Anyone know how to verify this. If that is what they are, anyone know if they could work on a superhawk?
Last edited by boxdogracing; 04-12-2010 at 01:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
doomcookie
General Discussion
31
07-18-2009 06:52 AM