Dirt in motor
#1
Dirt in motor
I took the covers and oil pan off today. dirt in the pan, a little in the covers. nothing really on the oil pickup screen. Will try to take oil pump off tomorrow.
Took about 45 min to get this bolt out. Gotta helicoil this one.
Also, gotta get the left exhaust mount bolts out of the frame.
I took the valve cover off of the back cylinder. Did not see any type of debris up there. Will take off the other one and look at it sometime. I want to see how the oil pump looks on the inside. I will also use the bore scope and see what the inside cylinder walls look like.
Took about 45 min to get this bolt out. Gotta helicoil this one.
Also, gotta get the left exhaust mount bolts out of the frame.
I took the valve cover off of the back cylinder. Did not see any type of debris up there. Will take off the other one and look at it sometime. I want to see how the oil pump looks on the inside. I will also use the bore scope and see what the inside cylinder walls look like.
Last edited by ride57; 09-19-2007 at 08:34 PM.
#5
It certainly wouldn't hurt after you get it back together run it for a bit and change the oil/filter again to get out any remaining debris you don't see - much you would after the break in period or just rebuilt.
Thread
Thread Starter
Forum
Replies
Last Post
Wheelerboy
Modifications - Performance
0
03-26-2010 06:59 PM
dive2277
General Discussion
7
10-26-2005 09:54 PM