Dirt in motor
I took the covers and oil pan off today. dirt in the pan, a little in the covers. nothing really on the oil pickup screen. Will try to take oil pump off tomorrow.
http://i38.photobucket.com/albums/e1...y/IMGP0417.jpg http://i38.photobucket.com/albums/e1...y/IMGP0412.jpg http://i38.photobucket.com/albums/e1...y/IMGP0410.jpg http://i38.photobucket.com/albums/e1...y/IMGP0409.jpg Took about 45 min to get this bolt out. Gotta helicoil this one. http://i38.photobucket.com/albums/e1...IMGP0416-1.jpg Also, gotta get the left exhaust mount bolts out of the frame. http://i38.photobucket.com/albums/e1...y/IMGP0418.jpg I took the valve cover off of the back cylinder. Did not see any type of debris up there. Will take off the other one and look at it sometime. I want to see how the oil pump looks on the inside. I will also use the bore scope and see what the inside cylinder walls look like. |
I got the oil pump out tonight. Absolutely no debris inside the pump. My picture-fu is weak tonight, but nothing in the pump is good news.
http://i38.photobucket.com/albums/e1...y/IMGP0420.jpg |
GOOD TO HEAR!
so when do you suspect to be back on the road..errr...track |
don't worry the debris won't make it past the filter, so the most important parts are clean (bearings). Good luck and good work so far, keep it up
|
It certainly wouldn't hurt after you get it back together run it for a bit and change the oil/filter again to get out any remaining debris you don't see - much you would after the break in period or just rebuilt.
|
All times are GMT -7. The time now is 06:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands