Jetting Recommendations
10-13-2006, 10:06 AM
#1
Junior Member
Squid
Thread Starter
Join Date: Sep 2006
Posts: 3
Jetting Recommendations
For 2000 Superhawk -- I took a hole saw and a die grinder to remove the inside of the ends of my mufflers. If anyone has done this and successfully rejetted please help. I need settings for needle, shims under needle, main jet and pilot jet.
10-14-2006, 05:37 PM
#5
Administrator
World Champion
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
Okay, well then only shim the needles a little, like half of above. 1.75-2.0 turns on the screws, whichever works better for you. Make sure you've got a good carb sync. Our bikes are sensitive to it.
Thread
Thread Starter
Forum
Replies
Last Post
