View Poll Results: VTR Of The Month - October 2010
motokraft



9
32.14%
inderocker



18
64.29%
CocoaCabana



1
3.57%
Voters: 28. You may not vote on this poll
VTR Of The Month - October 2010 - Winner: inderocker!
VTR Of The Month - October 2010 - Winner: inderocker!
Congratulations to inderocker for winning the October VTROTM!
https://www.superhawkforum.com/forum...58&postcount=6

--------------------------------------------------------
A BIG thanks to everybody who participated in September's VTROTM, and an especially big thanks to AngryOlaf for being our anchor nominee for the better part of the year.
If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory!
--------------------------------------------------------
VTROTM Rules:
motokraft - https://www.superhawkforum.com/forum...81&postcount=2
inderocker - https://www.superhawkforum.com/forum...58&postcount=6
CocoaCabana - https://www.superhawkforum.com/forum...63&postcount=8
https://www.superhawkforum.com/forum...58&postcount=6

--------------------------------------------------------
A BIG thanks to everybody who participated in September's VTROTM, and an especially big thanks to AngryOlaf for being our anchor nominee for the better part of the year.
--------------------------------------------------------
VTROTM Rules:
- Picture (REQUIRED) 3 Max! Please limit picture(s) size to 1024 x 768.
- Open to all Super Hawk Forum Members.
- You are limited to 1 entry per month.
- You can only nominate your own VTR. (projects, daily riders)
- Candidates will be nominated up until the 15th of the month or when 15 nominees have been made, whichever comes first.
- A poll will then be set up (on the 16th if less than 15 nominees) for everyone to vote for VTROTM for that month and close on the last day of the month.
- All participants who vote will get to vote only once per month so make it count!
- Negative comments, criticism, harassment, and all around bad manner wont be tolerated.
- If you have won VTR of the month, you cannot enter your bike for 12 months.
- In the event of a tie, a 7 day poll will be set up to break the tie.
- Rules subject to change / amendment at any time.
- Description of a candidates bike should include the following If available:
- owners name
- year
- color(s)
- modifications
- tech specs (if any)
motokraft - https://www.superhawkforum.com/forum...81&postcount=2
inderocker - https://www.superhawkforum.com/forum...58&postcount=6
CocoaCabana - https://www.superhawkforum.com/forum...63&postcount=8
Last edited by inderocker; Nov 1, 2010 at 01:05 AM.
howdy
hi everyone , i thought id enter my bike this month , hope theres a few nices bikes again , its good seeing all the different things that get done with these bikes (and all over there world too!! ) im in sunny
ireland ,
i bought this bike in 09 , an ex race bike on a standard and worn out chassis.
so the engine work was already done , spec: (as im informed )
1997 vtr1000f firestrom ,
moriwaki pistons / cams / flowed heads,
modified cct`s
modified carbs running open airbox (with filter)
kevlar clutch,
external oil cooler ,
close ratio gearbox ,
aftermarket ignition module / cdi , (electronics are not my strong point ) programmable (will be lefty alone !!!!!!!!!!!
micron carbon cans .
chassis :
cbr1000rr 05 front end complete
brembo master cylinder,
wilbers race shock,
sp rear wheel ,
all new bearings,
harris rearsets ,
sprint streeing damper,
r+g crash bungs .
bodywork :
vfr 800 tank ,
modified subframe ,
ducati 900 ss seatunit ,
self made side pods ,
cb 500 bars (i have some bodywork damage myself : )
recently dynoed very steady curve upto 110 bhp @ 8500rpm
and best of all 70 ftlbs of torque from 5500 - 8500 straight across
think thats it
ireland ,i bought this bike in 09 , an ex race bike on a standard and worn out chassis.
so the engine work was already done , spec: (as im informed )
1997 vtr1000f firestrom ,
moriwaki pistons / cams / flowed heads,
modified cct`s
modified carbs running open airbox (with filter)
kevlar clutch,
external oil cooler ,
close ratio gearbox ,
aftermarket ignition module / cdi , (electronics are not my strong point ) programmable (will be lefty alone !!!!!!!!!!!

micron carbon cans .
chassis :
cbr1000rr 05 front end complete
brembo master cylinder,
wilbers race shock,
sp rear wheel ,
all new bearings,
harris rearsets ,
sprint streeing damper,
r+g crash bungs .
bodywork :
vfr 800 tank ,
modified subframe ,
ducati 900 ss seatunit ,
self made side pods ,
cb 500 bars (i have some bodywork damage myself : )
recently dynoed very steady curve upto 110 bhp @ 8500rpm
and best of all 70 ftlbs of torque from 5500 - 8500 straight across
think thats it
Screw it, I'm in!
Mods so far...
-De-Burred & Polished Heads
-Yoshimura RS3 Titanium Slip On's
-Factory Pro Ignition Advancer
-Factory Pro "Ti" Jet Kit
-Factory Pro Evo Shift Star Kit
-'98 VTR Shifter Assembly
-K&N Air Filter
-TBR Pair Block Off Plates
-A.P.E. Manual Cam Chain Tensioner's
-F4i Front Brake Master Cylinder
-F4i Front Calipers
-Ohlins Steering Damper
-Race Tech Rebound & Gold Valves
-Gold Anodized Fork Caps (à la 2004 VTR)
-Pro Bolt Preload Adjusters
-Ohlins Rear Shock
-Michelin Pilot Road 2CT's
-D.I.D. X-Ring Gold 530ZVM2 Chain
-OEM Front & Afam Rear Sprockets 16/41
-Galfer Steel Braided Brake Lines
-Goodridge Steel Braided Clutch Line
-Throttlemiester Bar Ends
-Euro Pass Light Switch
-Helibars
-Zero Gravity Double Bubble Windscreen
-Sargent Seat
-Renthal Grips
-Trimmed Rear Fender
-Clear L.E.D. Rear Combination Light
-Clear Flush Mount L.E.D. Turn Signals
-YZFR6 Regulator Rectifier
-Galfer Wave Rotors
-Carrozzeria Vtrack Forged Aluminum Wheels
-All ***** Heavy-Duty Tapered Steering Head Bearings
-Scorpio SR-i600 Alarm


Mods so far...
-De-Burred & Polished Heads
-Yoshimura RS3 Titanium Slip On's
-Factory Pro Ignition Advancer
-Factory Pro "Ti" Jet Kit
-Factory Pro Evo Shift Star Kit
-'98 VTR Shifter Assembly
-K&N Air Filter
-TBR Pair Block Off Plates
-A.P.E. Manual Cam Chain Tensioner's
-F4i Front Brake Master Cylinder
-F4i Front Calipers
-Ohlins Steering Damper
-Race Tech Rebound & Gold Valves
-Gold Anodized Fork Caps (à la 2004 VTR)
-Pro Bolt Preload Adjusters
-Ohlins Rear Shock
-Michelin Pilot Road 2CT's
-D.I.D. X-Ring Gold 530ZVM2 Chain
-OEM Front & Afam Rear Sprockets 16/41
-Galfer Steel Braided Brake Lines
-Goodridge Steel Braided Clutch Line
-Throttlemiester Bar Ends
-Euro Pass Light Switch
-Helibars
-Zero Gravity Double Bubble Windscreen
-Sargent Seat
-Renthal Grips
-Trimmed Rear Fender
-Clear L.E.D. Rear Combination Light
-Clear Flush Mount L.E.D. Turn Signals
-YZFR6 Regulator Rectifier
-Galfer Wave Rotors
-Carrozzeria Vtrack Forged Aluminum Wheels
-All ***** Heavy-Duty Tapered Steering Head Bearings
-Scorpio SR-i600 Alarm


Last edited by inderocker; Dec 8, 2010 at 01:16 AM.
1998 honda vtr1000 super hawk 996 v-twin
1998 honda vtr1000 super hawk 996 v-twin ... has scorpion exhaust, rebuilt carbs with stage 1 dyno jet kit, k&n filter in modified airbox, pear valve block offs, adjustable cam tensioners, brand new battery under warrenty, new r-1 rectifier / regulator, new chain & sprockets, new spear shape grips, vortex keyless gas cap, new brakes, goodrich stainless steel braided brake lines, new set of michelin pilot tires , polished frame, swingarm, controls & wheel lips
well done inderocker
, that really is a neat and tidy ride , well deserved , tbh im not sure id fit in around your house as im normally covered in oil lol
,
anyways well done , and afai can see , i would happily vote for your machine in b o t y ,, anyways good luck ,
, anyways well done , and afai can see , i would happily vote for your machine in b o t y ,, anyways good luck ,
Thread
Thread Starter
Forum
Replies
Last Post
inderocker
Members Rides
29
Apr 1, 2010 11:59 PM
inderocker
Members Rides
32
Feb 1, 2010 08:16 AM
inderocker
Members Rides
34
Nov 3, 2009 06:38 AM




