View Poll Results: VTR Of The Month - April 2010
kai ju
6
7.79%
uchi
7
9.09%
8541Hawk
1
1.30%
Christian_man30
1
1.30%
shayne
21
27.27%
Tweety
6
7.79%
AngryOlaf
0
0%
mdbuehler
19
24.68%
Gilson
13
16.88%
98SoopaHawk
2
2.60%
luis saleiro
1
1.30%
Voters: 77. You may not vote on this poll
VTR Of The Month - April 2010 - Winner: shayne!
04-01-2010, 05:10 PM
#1
Moderator
MotoGP
Thread Starter
Join Date: May 2005
Posts: 2,708
VTR Of The Month - April 2010 - Winner: shayne!
Congratulations to shayne for winning the April VTROTM!
https://www.superhawkforum.com/forum...20&postcount=8
--------------------------------------------------------
A BIG thanks to everybody who participated in March's VTROTM!
If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory! 
--------------------------------------------------------
VTROTM Rules:
kai ju - https://www.superhawkforum.com/forum...24&postcount=2
uchi - https://www.superhawkforum.com/forum...27&postcount=3
8541Hawk - https://www.superhawkforum.com/forum...61&postcount=6
Christian_man30 - https://www.superhawkforum.com/forum...17&postcount=7
shayne - https://www.superhawkforum.com/forum...20&postcount=8
Tweety - https://www.superhawkforum.com/forum...0&postcount=13
AngryOlaf - https://www.superhawkforum.com/forum...9&postcount=14
mdbuehler - https://www.superhawkforum.com/forum...0&postcount=15
Gilson - https://www.superhawkforum.com/forum...8&postcount=22
98SoopaHawk - https://www.superhawkforum.com/forum...8&postcount=26
luis saleiro - https://www.superhawkforum.com/forum...7&postcount=35
https://www.superhawkforum.com/forum...20&postcount=8
--------------------------------------------------------
A BIG thanks to everybody who participated in March's VTROTM!
If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory! --------------------------------------------------------
VTROTM Rules:
- Picture (REQUIRED) 3 Max! Please limit picture(s) size to 1024 x 768.
- Open to all Super Hawk Forum Members.
- You are limited to 1 entry per month.
- You can only nominate your own VTR. (projects, daily riders)
- Candidates will be nominated up until the 15th of the month or when 15 nominees have been made, whichever comes first.
- A poll will then be set up (on the 16th if less than 15 nominees) for everyone to vote for VTROTM for that month and close on the last day of the month.
- All participants who vote will get to vote only once per month so make it count!
- Negative comments, criticism, harassment, and all around bad manner wont be tolerated.
- If you have won VTR of the month, you cannot enter your bike for 12 months.
- In the event of a tie, a 7 day poll will be set up to break the tie.
- Rules subject to change / amendment at any time.
- Description of a candidates bike should include the following If available:
- owners name
- year
- color(s)
- modifications
- tech specs (if any)
kai ju - https://www.superhawkforum.com/forum...24&postcount=2
uchi - https://www.superhawkforum.com/forum...27&postcount=3
8541Hawk - https://www.superhawkforum.com/forum...61&postcount=6
Christian_man30 - https://www.superhawkforum.com/forum...17&postcount=7
shayne - https://www.superhawkforum.com/forum...20&postcount=8
Tweety - https://www.superhawkforum.com/forum...0&postcount=13
AngryOlaf - https://www.superhawkforum.com/forum...9&postcount=14
mdbuehler - https://www.superhawkforum.com/forum...0&postcount=15
Gilson - https://www.superhawkforum.com/forum...8&postcount=22
98SoopaHawk - https://www.superhawkforum.com/forum...8&postcount=26
luis saleiro - https://www.superhawkforum.com/forum...7&postcount=35
Last edited by inderocker; 05-02-2010 at 12:18 PM.
04-01-2010, 11:49 PM
#2
Senior Member
SuperSport
Join Date: Jun 2005
Posts: 524
Last Chance.
This may be my last chance at this, if the bike sells that is.
So here I go once again.
All the regulars know the bike, so I won't waste anybody's time with a description, just a couple of pics...........and a guilt trip.
It's my birthday this month and wouldn't it be nice to win this one ?
So here I go once again.
All the regulars know the bike, so I won't waste anybody's time with a description, just a couple of pics...........and a guilt trip.
It's my birthday this month and wouldn't it be nice to win this one ?
04-02-2010, 02:13 AM
#3
Senior Member
SuperBike
Join Date: Aug 2009
Location: thorold ontario
Posts: 1,978
ill give this a shot,
names mariusz (uchi)
2001 firestorm
Jardine black SP one high mounts shortened 5"
D.I.D evr3 chain
AFAM -1/+2 sprockets
dynojet jet kit
racetech springs with heavier fluid
gsxr 750 calipers with steel braided lines
k6 radial master
ebc hh pads
gsxr solo tail with undertail
speedohealer
shindy daytona damper
t rex no cut frame sliders
bt016 tires
projector headlight
integrated blinkers in mirrors
names mariusz (uchi)
2001 firestorm
Jardine black SP one high mounts shortened 5"
D.I.D evr3 chain
AFAM -1/+2 sprockets
dynojet jet kit
racetech springs with heavier fluid
gsxr 750 calipers with steel braided lines
k6 radial master
ebc hh pads
gsxr solo tail with undertail
speedohealer
shindy daytona damper
t rex no cut frame sliders
bt016 tires
projector headlight
integrated blinkers in mirrors
04-02-2010, 04:23 AM
#4
Out of my mind, back in 5
MotoGP
Join Date: Nov 2006
Location: Skurup, Sweden
Posts: 6,109
This may be my last chance at this, if the bike sells that is.
So here I go once again.
All the regulars know the bike, so I won't waste anybody's time with a description, just a couple of pics...........and a guilt trip.
It's my birthday this month and wouldn't it be nice to win this one ?
So here I go once again.
All the regulars know the bike, so I won't waste anybody's time with a description, just a couple of pics...........and a guilt trip.
It's my birthday this month and wouldn't it be nice to win this one ?
04-02-2010, 08:19 AM
#5
Senior Member
Superstock
Join Date: Sep 2009
Location: Woodland Hills, CA
Posts: 421
p.s. I thought all those mods made you guys the lightweights!
04-02-2010, 09:15 AM
#6
Banned
MotoGP
Join Date: Aug 2007
Location: Lake View Terrace, CA
Posts: 5,942
Well as I am now in the OCMD club I might as well join the fun....
So now to figure out what I've done so far.....
Start with a '98 (s\n 445) bought new in 9\97
Motor:
Lightened Flywheel
Ported heads
HRC jet kit
4 degree ignition advancer
Leo Vince Slip Ons with Modified Stock Header (Restriction removed and welds ground down)
Suspension & Brakes:
RC51 SP2 forks w\ Ohlins internals set up by Dan Kyle
SP2 Master Cyl & Calipers
SP2 Front Wheel
CBR1000 Front Rotors
Braced Swingarm
Ohlins Shock
CBR900rr Rear Wheel
EBC Rear Rotor
Other Stuff:
All S\S Braided lines
16\43 Gearing with AFAM Sprockets & D.I.D. Chain
Shortened Rear Signals (Aftermarket rear signals will get you pulled over in this area)
Flush Mount Front Signals
Shortened Rear Fender
Two Brothers Passenger Peg Eliminators
and other stuff that I don't remember at this time......
So now to figure out what I've done so far.....
Start with a '98 (s\n 445) bought new in 9\97
Motor:
Lightened Flywheel
Ported heads
HRC jet kit
4 degree ignition advancer
Leo Vince Slip Ons with Modified Stock Header (Restriction removed and welds ground down)
Suspension & Brakes:
RC51 SP2 forks w\ Ohlins internals set up by Dan Kyle
SP2 Master Cyl & Calipers
SP2 Front Wheel
CBR1000 Front Rotors
Braced Swingarm
Ohlins Shock
CBR900rr Rear Wheel
EBC Rear Rotor
Other Stuff:
All S\S Braided lines
16\43 Gearing with AFAM Sprockets & D.I.D. Chain
Shortened Rear Signals (Aftermarket rear signals will get you pulled over in this area)
Flush Mount Front Signals
Shortened Rear Fender
Two Brothers Passenger Peg Eliminators
and other stuff that I don't remember at this time......
04-02-2010, 06:56 PM
#8
Senior Member
SuperSport
Join Date: Dec 2005
Location: Sunshine Coast, Australia
Posts: 963
I really can't list all my mods. It took me 3 years!!!!
Suffice to say it has lots of hand made pieces on it, and I have polished, painted, and powdercoated everything. I have mods that most people don't notice, such as the one-piece fairing. Oh, and the rear suspension linkage that has had all the cast marks removed before it was polished. Did somebody say OMCD?
I can do a mods list if necessary, but it will be outa control.
EDIT : Ok, here is a list. Not a full one, but what I can remember just now.
Fairing has been made one piece. Parking light removed and custom fairing made. Grills made up to cover vents. Custom paint.
Undertail modified to fit better, and indicators located on ally bracket. Clear tail light.
Aftermarket mirrors with indicators modified to fit OEM bases. Wiring moved and repainted.
Sub-frame modified to incorporate custom mounts for mufflers. Holes filled, joins re-welded. Repainted.
Staintune mufflers from FJR1300. Moriwaki Titanium pipes ceramic coated and custom link pipes to suit mufflers.
Swingarm has had cast marks removed and welds cleaned up. Holes tapped for custom mount for Powerbronze hugger (mount supplied was rubbish). Swingarm fully polished and clear powdercoated.
Suspension re-sprung and re-valved at both ends. Shock repainted. Forks polished and clear powdercoated.
Dash, controls, brackets, widgets and whatsits have all been polished or repainted. Gauges have had faces repainted single colour.
CBR600 F4 master cylinder and calipers (repainted them too!)
Braided lines all round.
Pazzo levers
Custom seat with a different shape and cover. Seat base has been modified to close up gap to fairing.
Frame has been fully polished and clear powdercoated.
Engine has had total rebuild - new everything. Higher comp forged pistons, lightened flywheel, fully balanced. Modified airbox with billet ally velocity stacks.
Modified shifter with heim joints, re-bushed, and Factory Pro Shift Star.
Custom wheels and brake rotors.
Every nut and bolts has been replaced with either a new OEM, ally or stainless item.
And no doubt some other stuff too.
Last edited by shayne; 04-05-2010 at 07:02 PM.
04-02-2010, 09:05 PM
#10
OCMD honorary member
Superstock
Join Date: May 2007
Location: Olympia, WA
Posts: 252
Holy snikes! April 2nd and we already have a handfull of entries. Last month it started midway thru the month and looked like the VTROM might go away.
Olaf where you at? You need to be in every month, I read it in your contract.
Tweety you stay out until your next wave of mods are done.
Where is my calendar, where is the fame and glory? Indie what can be done.
Is the check in the mail?
This is exciting to see so many entries so soon in the month, good job.
Olaf where you at? You need to be in every month, I read it in your contract.
Tweety you stay out until your next wave of mods are done.
Where is my calendar, where is the fame and glory? Indie what can be done.
Is the check in the mail?
This is exciting to see so many entries so soon in the month, good job.
04-02-2010, 11:30 PM
#11
Senior Member
Superstock
Join Date: Sep 2009
Location: Woodland Hills, CA
Posts: 421
04-03-2010, 01:56 AM
#13
Out of my mind, back in 5
MotoGP
Join Date: Nov 2006
Location: Skurup, Sweden
Posts: 6,109
Time for a shot at the title I reckon Tweety. If the heavy hitters are stepping up this month then I say we should be having a crack at it.
I really can't list all my mods. It took me 3 years!!!!
Suffice to say it has lots of hand made pieces on it, and I have polished, painted, and powdercoated everything. I have mods that most people don't notice, such as the one-piece fairing. Oh, and the rear suspension linkage that has had all the cast marks removed before it was polished. Did somebody say OMCD?
I can do a mods list if necessary, but it will be outa control.
I really can't list all my mods. It took me 3 years!!!!
Suffice to say it has lots of hand made pieces on it, and I have polished, painted, and powdercoated everything. I have mods that most people don't notice, such as the one-piece fairing. Oh, and the rear suspension linkage that has had all the cast marks removed before it was polished. Did somebody say OMCD?
I can do a mods list if necessary, but it will be outa control.
These are the mods I can currently remember...
I'm pretty certain I have forgotten about as many more... I'm sure there are a few stock items left somewhere to modify, I just cant find them... I'm starting to re-modify my modifications... 
CBR 1000RR fork:
- CBR 1000RR USD fork (Reworked with Öhlins internals)
- CBR 1000RR wheel with 320mm rotors
- CBR 1000RR complete brake (Radial M/C, radial calipers)
- CBR954/929 triple tree
- ConvertiBars adjustable clip-ons
- Moved the radiators to make room for the fork
CBR 1000RR instrument cluster:
- RC51-SP2 temp sensor
- Integrated gear indicator (build and design by me)
- Integrated fuelgauge (In progress) & charging indicator
- Speedohealer (v4)
RC51-SP2 swingarm:
- RC51-SP2 swingarm with custom welded lower link mount (Idea from hawkter996)
- CBR F4i rear shock (Modified with heavier spring and Racetech Goldvalve by Jamie Daugherty)
- Custom height adjustable top shock mount
- RC51-SP2 rear caliper & caliper mount
- CBR 1000RR rear wheel & sprocket (6" with a 17/190/55)
- Custom mount plate for rearset at the pivot bolt
- Custom rearset (parts from cheap eBay set and some custom made)
Fairing:
- Dark tinted DB screen
- CBR 954 OEM hugger
- Mototeck undertail
- GSX-R mirrors with integated signals on custom brackets
- T-Rex sliders
- Delrin sliders on both wheel axles
- Color matched chin spoiler (even though it's missing/not mounted in the pics)
Electrical:
- HID projector (Nissan G35) High & low beam.
- Brake light modulator (build and design by me)
- R1/R6 Regulator/Rectifier Swap
- Peugeot 206/307 flush mount indicators
- LED plate light in Mototeck undertail
- LED taillight Retrofit (Idea from haknslash)
- 8 pack of A123 cells replaces the stock battery
- Moved ECU & CDI to the battery box with the new smaller battery
- Improved wire harness with more ground points
Engine:
- Custom cams (equivalent to Moriwaki Stage 1)
- Ported & flowed heads
- Lightened flywheel
- BMC street airfilter
- FloCommander
- Aluminum velocity stacks
- DIY Manual CCT's (bolt through drilled out stock CCT body)
Misc:
- Sargent seat (Oh boy! it's even better than advertised!)
- Aluminum front fairing stay & rear subframe (custom made by me)
- Jardine Aluminum high mount slip-on, removed muffler mount from stock rear footpegs and spaced them out
- 16/42 gearing
- Short throw throttle
- Custom made mount for my disc lock (I got tired of opening the seat to store it)
Last edited by Tweety; 04-10-2010 at 02:14 PM. Reason: VTS didn't like my images... :(
04-03-2010, 05:23 PM
#14
Senior Member
Superstock
Join Date: Sep 2009
Location: Woodland Hills, CA
Posts: 421
Alright... fresh photos... All your custom work and fancy bits are no match now!!!
AngryOlaf's '00 Superhawk!
Enjoy!
- Mike
AngryOlaf's '00 Superhawk!
- Galfer SS Lines
- Helibars
- Corbin Seat (optional Gunfighter backrest not pictured)
- Reckless Fiberglass Hugger in flat black
- Custom paint removal on right side fairing and tail (from the PO. Give the bike that "lived in" look...)
- "Stubby" stock pipes (Left cut recently to deal with this issue)
- RK Chain
- Stock CCTs (APEs still sitting in the garage waiting for valve check/adjust
- Rare complete factory rear fender. (I hear they will be collectible some day!)
Enjoy!
- Mike
04-07-2010, 06:34 PM
#15
Senior Member
Back Marker
Join Date: May 2005
Location: Seattle, WA
Posts: 216
Was hoping the Seattle rain would GO AWAY so I could get some sunny outdoor pics, but not meant to be it seems 
Will try and get updated pics before this closes!
Repainted with Honda RCV paint scheme
CBR 929 front end / rotors / fender
CBR 1000RR Dash / Gauges
OZ HL-02 wheels (for the RC-51)
Honda VFR gas tank w/modded airbox
Suzuki Hayabusa controls (both clipons, handlebar choke!)
Bar end mirros / block off plates
Steel braided break / clutch lines
K&N Filter
Yamaha R6 Regulator / Rectifier
HID headlight
Carbon Fiber Two Bros exhaust
Complete undertail with integrated turn signals
LED Brake / Tail light
APE CCT's
Speedo Healer
Forgot some of the other things as this has been going on so long lol
Will try and get updated pics before this closes!Repainted with Honda RCV paint scheme
CBR 929 front end / rotors / fender
CBR 1000RR Dash / Gauges
OZ HL-02 wheels (for the RC-51)
Honda VFR gas tank w/modded airbox
Suzuki Hayabusa controls (both clipons, handlebar choke!)
Bar end mirros / block off plates
Steel braided break / clutch lines
K&N Filter
Yamaha R6 Regulator / Rectifier
HID headlight
Carbon Fiber Two Bros exhaust
Complete undertail with integrated turn signals
LED Brake / Tail light
APE CCT's
Speedo Healer
Forgot some of the other things as this has been going on so long lol
Last edited by mdbuehler; 04-10-2010 at 07:58 PM.
04-09-2010, 08:34 PM
#17
OCMD honorary member
Superstock
Join Date: May 2007
Location: Olympia, WA
Posts: 252
04-10-2010, 04:04 AM
#18
Out of my mind, back in 5
MotoGP
Join Date: Nov 2006
Location: Skurup, Sweden
Posts: 6,109
them's some sweet machines.
04-10-2010, 07:36 AM
#22
Member
Squid
Join Date: Feb 2009
Location: Essex, uk
Posts: 44
My Moriwaki Stage 1 track bike
Hi All, I thought I'd give this one a go. Just completed it, ready for a track day at Snetterton on Monday.
Mods are:
Moriwaki Stage 1 tune, 119rwBHP
Moriwaki full Ti race exhaust
Moriwaki race carbs
CBR600 Fuel pump
Race tuned front forks (Revolution)
Ohlins rear, braced swing arm
Radial MC ZX10r and CBR900RR calipers
HRC QA throttle
Prolite front discs
Harris rear sets
Moriwaki paint job
New Dunlop 209s
Custom Ally crash bungs
ummmm... hopefully shiney side up this time..
These pictures are perfectly sized!
Mods are:
Moriwaki Stage 1 tune, 119rwBHP
Moriwaki full Ti race exhaust
Moriwaki race carbs
CBR600 Fuel pump
Race tuned front forks (Revolution)
Ohlins rear, braced swing arm
Radial MC ZX10r and CBR900RR calipers
HRC QA throttle
Prolite front discs
Harris rear sets
Moriwaki paint job
New Dunlop 209s
Custom Ally crash bungs
ummmm... hopefully shiney side up this time..
These pictures are perfectly sized!
04-10-2010, 12:02 PM
#24
OCMD honorary member
Superstock
Join Date: May 2007
Location: Olympia, WA
Posts: 252
How bout this mdbuehler bike, I like it.
Tweety can we get some larger pics? The one you have is way too dark to see anything and the other two are small and do not enlarge. Get with the program man.
04-10-2010, 03:24 PM
#25
Senior Member
Back Marker
Join Date: May 2005
Location: Seattle, WA
Posts: 216
.. and its LOCAL! Gotta vote local ya know! And don't forget that Seattle, is practically in Canada, our brave brothers to the North. Just say'n.
Tried for some outdoor pics, but its so overcast and glary out there the sky blends into the background of the forum, sigh. 5 more days to get some real sun, c'mon weather!
And don't forget that Seattle, is practically in Canada, our brave brothers to the North. Just say'n.Tried for some outdoor pics, but its so overcast and glary out there the sky blends into the background of the forum, sigh. 5 more days to get some real sun, c'mon weather!
04-10-2010, 11:03 PM
#26
Junior Member
Squid
Join Date: Sep 2008
Posts: 3
Haven't been here in some time, but I've made changes. I'll put a before and 2 afters.
Pedro O.
1998 Super Hawk
Dodge Blaze Red Pearlescent
PAIR removed. K&N filter. Front rad mod. Straight pipe. German plastics provided by European Streetfighter. Beach Choppers grips.
Pedro O.
1998 Super Hawk
Dodge Blaze Red Pearlescent
PAIR removed. K&N filter. Front rad mod. Straight pipe. German plastics provided by European Streetfighter. Beach Choppers grips.
Last edited by 98SoopaHawk; 04-10-2010 at 11:07 PM.
