So I went down last night *PICS*
#1
So I went down last night *PICS*
poor bike
scratched my right side mirror, bar end, cracked the front fairing, cracked the crankcase cover, and dented and scratched the crap out of the exhaust canister
i'm losing oil out of the crankcase, so if anyone happens to have that part lying about, let me know what you want for it shipped to 73075...the rest i can live with, but if you have a good deal on the front fairing, i'd sure look at it
oh, and i got some roadrash on my right leg and elbow, nothing major...that's what i get for riding with just a helmet and gloves
anyway, on with the pics
you can't really see the crack here, but it is
******* cager cut me off at an intersection and i evaded...guess i evaded a bit too much
scratched my right side mirror, bar end, cracked the front fairing, cracked the crankcase cover, and dented and scratched the crap out of the exhaust canister
i'm losing oil out of the crankcase, so if anyone happens to have that part lying about, let me know what you want for it shipped to 73075...the rest i can live with, but if you have a good deal on the front fairing, i'd sure look at it
oh, and i got some roadrash on my right leg and elbow, nothing major...that's what i get for riding with just a helmet and gloves
anyway, on with the pics
you can't really see the crack here, but it is
******* cager cut me off at an intersection and i evaded...guess i evaded a bit too much
#8
I have a RS engine case that I will sell. I bought it to replace one that I rashed when I crashed. It turned out that one I bought (used) was also rashed so I just left the original on the bike.
How much, you ask?
Dunno what they're worth new, but how does $100US plus shipping sound? If we're sending across the US/CDN border I highly recommend using the mail systen (Express Post), otherwise you'll get dinged by UPS for their 'Expiditing' fees.
Ping me offline if you are interested.
geoffrey dot helmes at sympatico dot ca.
Cheers!
Geoff in Almonte
How much, you ask?
Dunno what they're worth new, but how does $100US plus shipping sound? If we're sending across the US/CDN border I highly recommend using the mail systen (Express Post), otherwise you'll get dinged by UPS for their 'Expiditing' fees.
Ping me offline if you are interested.
geoffrey dot helmes at sympatico dot ca.
Cheers!
Geoff in Almonte
#9
you can also weld the right case easily, or a welder can anyway
my friend went down and put a hole in his clutch case in a similar place, a little smaller, I tigged it back up, ground it flat and matched the contours, he painted it with kyrlon spraypaint that matched the original piant, 10k later it still looks like the day it rolled off the showroom floor
Just an option if you want to save a little money and dont want to worry about the waperpump from a used cover
my friend went down and put a hole in his clutch case in a similar place, a little smaller, I tigged it back up, ground it flat and matched the contours, he painted it with kyrlon spraypaint that matched the original piant, 10k later it still looks like the day it rolled off the showroom floor
Just an option if you want to save a little money and dont want to worry about the waperpump from a used cover
#10
+1 on what AC Cobra says.
A good metal guy can clean that up like it never happened. Prolly for cheaper than buying used.
I just checked Ron Ayers and they list the cover at $165US plus shipping.
My earlier post was out of line. I'll sell the one I have for $50USD plus shipping. I'll post a pic if I can remember how to work the camera and interest is shown. It has some mild rash in the same general area as the damage you posted pics of.
I bought it from a salvage yard (paid more than $50 for it) so I cant vouch for the water pump impeller thingee.
Cheers!
Geoff in Almonte
A good metal guy can clean that up like it never happened. Prolly for cheaper than buying used.
I just checked Ron Ayers and they list the cover at $165US plus shipping.
My earlier post was out of line. I'll sell the one I have for $50USD plus shipping. I'll post a pic if I can remember how to work the camera and interest is shown. It has some mild rash in the same general area as the damage you posted pics of.
I bought it from a salvage yard (paid more than $50 for it) so I cant vouch for the water pump impeller thingee.
Cheers!
Geoff in Almonte
#11
I have a clutch cover with some rash but no holes or cracks. I low sided and replaced it witha better one. Let me know if you want it just pay for shipping.
glad your not hurt worse.
frank
glad your not hurt worse.
frank
#13
thx for all the advice guys
and i am interested in the cover, how can i check to make sure the impeller is good to go?
and i just figured out why my tailbone is hurting so much, i thought i just bumped it
i have a spot of roadrash the size of a half dollar right on my tailbone
and i am interested in the cover, how can i check to make sure the impeller is good to go?
and i just figured out why my tailbone is hurting so much, i thought i just bumped it
i have a spot of roadrash the size of a half dollar right on my tailbone
#14
So, doing a little post-crash inspection with Momma's makeup mirror? I shouldn't laugh because I know how bad it hurts. I broke my tailbone falling on the ice in Manysnodalot one winter and I couldn't even freekin' breathe right. It hurt something fierce. Tend to your body first and then the bike. I'm glad it wasn't worse. Growing skin is no fun.
#17
"and i am interested in the cover,.....
Mine? or Frank's freebee? No matter, I'll post pics tonite when I get home.
I still think that AC Cobra's suggestion would be simpler/cheaper.....
"....how can i check to make sure the impeller is good to go?"
I have no idea. Any of you techies know?
If you repair/reuse your original cover, the question is acedemic....you know that the one you have works.
G
Mine? or Frank's freebee? No matter, I'll post pics tonite when I get home.
I still think that AC Cobra's suggestion would be simpler/cheaper.....
"....how can i check to make sure the impeller is good to go?"
I have no idea. Any of you techies know?
If you repair/reuse your original cover, the question is acedemic....you know that the one you have works.
G
#19
car split like it was on fire...noone was around, i didn't bother calling the cops, i don't even have a good description of the car...it all happened so fast and i didn't target fixate
Thread
Thread Starter
Forum
Replies
Last Post
Milkman III
General Discussion
0
07-12-2005 06:21 AM