Greetings From New Forum Member
01-21-2013, 07:29 AM
#1
Senior Member
Back Marker
Thread Starter
Join Date: Jan 2013
Location: Columbus Ohio
Posts: 107
Greetings From New Forum Member
hello all... Just wanted to say hi... Im not new to riding been doing so for over 10 years but I did just pick up a superhawk... After I was hit on my 954 a few years ago I took a vacation from riding but I decided to get back in the saddle... Anyway I picked up a MINT 2002 Hawk with 3200 miles on her and im getting ready to do a few things to her any suggestions on exhaust? I like the high mount jardine but then ill loose the passenger pegs and I have to keep those...
01-21-2013, 07:38 AM
#2
Senior Member
Superstock
Join Date: Apr 2011
Location: Edwards AFB, CA
Posts: 491
Welcome! before exhaust you may want to change out your auto CCTs for some manual CTTs if it has not been done yet. U have seen a few bikes out there retain the passenger pegs by using the two brothers Hi mount cans. Maybe some longer bolts and some spacers on the outside of the mounts might work as well?
01-21-2013, 07:46 AM
#4
Senior Member
Back Marker
Thread Starter
Join Date: Jan 2013
Location: Columbus Ohio
Posts: 107
nice... I was trying to decide between the jardine rt1 and the two brothers m2 black series... as far as the ape cct goes I really dont care for them... I had one on my cbr 600 and could never get it set right... I trust the auto cct... I am new to vtwins tho and as far as this being a carb bike is a rejet needed with good quality pipes?
01-21-2013, 08:08 AM
#5
Senior Member
SuperBike
Join Date: Jul 2011
Location: South of Live Free or Die & North of Family Guy
Posts: 1,456
Welcome on board, we have a member that sells high mount MIG set with spacers to keep the passenger pegs, also a very good deal, you should check this out:
https://www.superhawkforum.com/forum...st-sale-29609/
https://www.superhawkforum.com/forum...st-sale-29609/
01-21-2013, 08:12 AM
#6
Senior Member
Back Marker
Join Date: May 2012
Location: Akron, Ohio
Posts: 230
Welcome to the forum! This is a great place to be with good people that have alot of knowledge and experience with these bikes. I will caution you though - check the "search" button prior to posting questions as most subjects have been thoroughly covered over the years. This is a great place for technical expertise - especially from our senior members. Going to Mid Ohio for the Superbike race this year by chance? Good luck and welcome again!
01-22-2013, 06:17 PM
#9
Senior Member
Back Marker
Thread Starter
Join Date: Jan 2013
Location: Columbus Ohio
Posts: 107
Welcome on board, we have a member that sells high mount MIG set with spacers to keep the passenger pegs, also a very good deal, you should check this out:
https://www.superhawkforum.com/forum...st-sale-29609/
https://www.superhawkforum.com/forum...st-sale-29609/
01-22-2013, 06:33 PM
#10
Senior Member
Back Marker
Thread Starter
Join Date: Jan 2013
Location: Columbus Ohio
Posts: 107
that I do sir... She was a garage kept one owner bike... Only has 2K miles... Its basically a brand new bike showroom clean not a single imperfection... The guy only rode it on the weekend and only a few miles here and there... Got it for $2700.00 all stock as it is now but im adding a few things this winter just ordered all this stuff from ebay """"" SLIDERS, JARDINE RT1 EXHAUST, FENDER ELIMINATOR WITH LED TAIL LIGHT, SMOKED SCREEN, SCOTTS DAMPER, HID HEADLIGHT, FRONT FLUSH MOUNTS, FULL BELLY PAN, ADJUSTABLE LEVERS, BILLET CLUTCH AND BRAKE RESERVOIR CAPS, BILLET CHAIN GUARD WITH VTR CARVED IN IT,""""" and a few more small things I cant think of right now... 
Last edited by Northman69; 01-22-2013 at 06:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TboneNast
Members Rides
20
07-07-2014 02:53 PM
