two brothers high mount help
09-23-2011, 08:14 PM
#3
Banned
MotoGP
Join Date: Aug 2007
Location: Lake View Terrace, CA
Posts: 5,942
it should go where the rear pegs mount to the sub-frame.
So you can either use some extensions and longer bolts to remount the rear peg brackets or leave them off if you don't carry a passenger.
So you can either use some extensions and longer bolts to remount the rear peg brackets or leave them off if you don't carry a passenger.
09-23-2011, 10:25 PM
#4
Member
Squid
Join Date: Apr 2011
Location: Washington State
Posts: 84
My high mounts came with new hangers that replace the stock ones with the footpegs. I ended up using some longer bolts to remount the stock brackets on top of the TBR ones. Here is a picture from before I did that.
10-02-2011, 06:51 PM
#7
Senior Member
Superstock
Thread Starter
Join Date: Jul 2006
Location: fayetteville NC
Posts: 468
10-11-2011, 02:18 PM
#12
MandownMertech
Superstock
Join Date: Sep 2011
Location: Sacramento / NorcaL
Posts: 289
Yeah, I have a feeling the peg bracketry will hit the can. But this is a fresh idea and I shall have to give er a try.
I must have skimmed right over that part of the above post. Stupid me.
I must have skimmed right over that part of the above post. Stupid me.
10-11-2011, 03:39 PM
#13
Jack of all Master of non
Superstock
Join Date: May 2011
Location: Jacksonville,fl
Posts: 297
do you have your factory pass pegs. i am going to a low mount pipes and need a set of rear pegs.
10-11-2011, 03:49 PM
#14
Senior Member
MotoGP
Join Date: Jan 2005
Location: Gainesville FLA.
Posts: 3,844
07-24-2019, 01:28 PM
#19
Senior Member
Back Marker
Join Date: Nov 2012
Location: Henderson, NV
Posts: 211
Thread
Thread Starter
Forum
Replies
Last Post
