Technical Discussion Topics related to Technical Issues

stuttering, bucking, misfiring at steady 2-4k rpm

Old Jan 10, 2007 | 09:54 AM
  #1  
zimm's Avatar
Thread Starter
Member
Squid
 
Joined: Jun 2006
Posts: 55
From: Kaneohe HI
zimm is on a distinguished road
stuttering, bucking, misfiring at steady 2-4k rpm

The superhawk is acting up. At steady speed between 2000-4000rpm, like going 30mph, the engine "hiccups" quite a bit. It sounds like a misfire, engine bucks and then smooths out. I think it's running lean, but I'm not sure. I have devil pipes and a K&N jet kit. The jet kit has been in place for 22,000 miles with no problems before.

I'm thinking about re-syncing the carbs and checking for vacuum leaks. Maybe I should also change the plugs. Any other suggestions? Anyone have this problem?

It runs great while accelerating or running on the highway.
Old Jan 10, 2007 | 01:05 PM
  #2  
superbling's Avatar
Moderator
MotoGP
 
Joined: Dec 2004
Posts: 2,553
From: South Texas
superbling is on a distinguished road
Originally Posted by zimm
The jet kit has been in place for 22,000 miles with no problems before.

I'm thinking about re-syncing the carbs and checking for vacuum leaks. Maybe I should also change the plugs. Any other suggestions? Anyone have this problem?
Mine was behaving identically and in roughly the same condition (jet kit, pipes, mileage) as yours. Going up a notch on the needles did the trick.
Old Jan 10, 2007 | 01:13 PM
  #3  
zimm's Avatar
Thread Starter
Member
Squid
 
Joined: Jun 2006
Posts: 55
From: Kaneohe HI
zimm is on a distinguished road
Raise the needles a notch, or raise the clip a notch on the needles?
Old Jan 10, 2007 | 11:50 PM
  #4  
Hawkrider's Avatar
Administrator
World Champion
 
Joined: Dec 2004
Posts: 105,287
From: Fulton, MO
Hawkrider will become famous soon enoughHawkrider will become famous soon enough
+1

Then sync the carbs. Clean your air filter too.

I think he meant go richer, which would be lowering the clip, thus raising the needle.
Old Jan 12, 2007 | 02:20 PM
  #5  
Mick-e's Avatar
Member
Squid
 
Joined: Jun 2006
Posts: 75
From: City By The Bay
Mick-e is on a distinguished road
Are the needles titanium?
Old Jan 12, 2007 | 03:01 PM
  #6  
zimm's Avatar
Thread Starter
Member
Squid
 
Joined: Jun 2006
Posts: 55
From: Kaneohe HI
zimm is on a distinguished road
No, stainless steel. I just raised them a notch this afternoon and re-sync'd the carbs too. I'll do a test ride tomorrow and report back.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dm440c
Technical Discussion
7
Feb 29, 2012 05:29 PM
CentralCoaster
Technical Discussion
13
Sep 13, 2008 12:51 AM
kenhawk
Technical Discussion
19
Aug 24, 2008 08:10 PM
ghopki1
Technical Discussion
3
Jul 28, 2008 06:20 AM
iamanonymous
Technical Discussion
20
Mar 7, 2007 03:13 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:34 AM.