No turn signals working
#1
No turn signals working
Small issue on my bike. None of the turn signals are working, but the running lights are working. I'm thinking it's the relay, but before I buy parts, I wanted to see what is the common item that fails on the Superhawk in this situation? Do the switches commonly fail as well? I think I will just replace the relay with an aftermarket digital relay, the OEM FR-3303 seems a bit pricey from what I have found.
#3
So, I did some multimeter testing, and found that the switch is working. I tested continuity from the gray wire (center wire) in the relay connector to the right and left turn signal. The circuit closes fine when the switch is turned on. So I then decided to plug my relay back in, and it worked... Weird. It's a little slow to start blinking, and the switch feels gummed up. I think I will take it apart for cleaning.
Thread
Thread Starter
Forum
Replies
Last Post
Magnus
Classifieds
5
05-29-2014 06:52 PM
johnclopp85
Technical Discussion
5
05-13-2009 07:20 AM