how long for bearing failure?
04-24-2011, 12:35 PM
#2
Member
Squid
Join Date: Apr 2011
Location: Washington State
Posts: 84
Not long, if you have milky oil you need to flush everything ASAP.
When breaking in an engine/firing for the first time, you always use distilled water instead of an antifreeze mix just in case there is a leak somewhere. It doesn't take much time to damage internals.
When breaking in an engine/firing for the first time, you always use distilled water instead of an antifreeze mix just in case there is a leak somewhere. It doesn't take much time to damage internals.
04-24-2011, 01:19 PM
#3
Senior Member
Back Marker
Thread Starter
Join Date: Mar 2011
Posts: 238
Well i had a gasket failure awhile ago and am just trying to get ideas while not having the bike with me. I might have ran the bike for like a minute with the really bad oil. Oil was fine before the big failure.
Thread
Thread Starter
Forum
Replies
Last Post
vtrlvr
Modifications - Performance
11
04-09-2007 10:52 AM
