how do turn the crank?
#1
how do turn the crank?
Hey guys
I am about to embark on the changing of the CCTs myself and have the hawk on rear stand. The question is how do I get to the index mark "FT" and "RT" for TDC? I tired to turn the wheel in 1st gear but it won't budge. How do I turn the crank to align the marks at the timing hole?
Thanks
I am about to embark on the changing of the CCTs myself and have the hawk on rear stand. The question is how do I get to the index mark "FT" and "RT" for TDC? I tired to turn the wheel in 1st gear but it won't budge. How do I turn the crank to align the marks at the timing hole?
Thanks
#2
Use a socket and a long breaker bar.... you'll need to remove the cap/cover with the hex on it on the left side case cover.. under that you'll be able to access it.
BTW... you might wanna try rotating the wheel at a higher gear 6th... I believe this will give you more mechanical advantage...
J.
BTW... you might wanna try rotating the wheel at a higher gear 6th... I believe this will give you more mechanical advantage...
J.
Thread
Thread Starter
Forum
Replies
Last Post
Magnus
Classifieds
5
05-29-2014 06:52 PM
johnclopp85
Technical Discussion
5
05-13-2009 07:20 AM