Front APE CCT Adjustment
#1
Front APE CCT Adjustment
Hi all,
My bike's been fitted with APE tensioners, adjusting the back one is fine but the front is hidden behind a radiator hose. Is there an easy way to adjust the front tensioner?
Thanks
My bike's been fitted with APE tensioners, adjusting the back one is fine but the front is hidden behind a radiator hose. Is there an easy way to adjust the front tensioner?
Thanks
#3
or you can lift the tank like a lid remove the air box adjust and reconnect everything. I don't know what is more of a pain though. If it was me I would remove the airbox, I have done it so many times it would be a ten minute job.
#4
I adjust the shaft itself with a shallow socket on a ratchet. I can't lift the ratchet handle enough to get a perfect fit, but the shaft moves easily and it works for me. On my bike at least the rad hose only blocks the lock nut. I slide a long, narrow screw driver under the hose and pry it up a little. That gives me enough room to get at the lock nut.
Last edited by RK1; 03-25-2010 at 09:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Crashrat
Classifieds
40
10-11-2012 08:25 PM