Technical Discussion Topics related to Technical Issues

bike cutting out

Thread Tools
 
Search this Thread
 
Old May 10, 2014 | 03:17 PM
  #1  
foosfan's Avatar
Thread Starter
Junior Member
Squid
 
Joined: Mar 2014
Posts: 12
foosfan is on a distinguished road
bike cutting out

ok....replaced ccts with manuals....bike winds to about 3500 rpm then acts like its out of fuel .... if i give alot more throttle it will pick up speed but lucky to hit80 mph......also if itry n keep it at a constant its kind a like morse code rata tat tat tat if that makes sense ......also tots of back fire on decil.......also fifth n sixth i gotta give it lots of fuel......also it will wind out btr with choke on,,.....any ideas?
Old May 10, 2014 | 04:33 PM
  #2  
Kurt999's Avatar
Junior Member
Squid
 
Joined: Apr 2014
Posts: 12
Kurt999 is on a distinguished road
have you got the vacuum pipe for the fuel tap on the correct spigot? It goes on the one at the back of the tap that points to the left of the bike, not the one that points downwards
Old May 10, 2014 | 05:45 PM
  #3  
Jack Flash's Avatar
Well take off, eh.
SuperBike
 
Joined: Jun 2012
Posts: 1,206
From: QC, Canada
Jack Flash is on a distinguished road
Originally Posted by foosfan
ok....replaced ccts with manuals....bike winds to about 3500 rpm then acts like its out of fuel .... if i give alot more throttle it will pick up speed but lucky to hit80 mph......also if itry n keep it at a constant its kind a like morse code rata tat tat tat if that makes sense ......also tots of back fire on decil.......also fifth n sixth i gotta give it lots of fuel......also it will wind out btr with choke on,,.....any ideas?
Sounds like you've gotta do the CCT's again. Skipped a tooth doing the job.
Old May 10, 2014 | 06:51 PM
  #4  
VTR1000F's Avatar
Thread Killer
SuperBike
 
Joined: Apr 2013
Posts: 2,097
From: Geneseo, IL
VTR1000F is on a distinguished road
What he said.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MarkGnarsby
Technical Discussion
5
Apr 15, 2013 05:51 AM
msethhunter
Technical Discussion
18
May 23, 2011 01:16 AM
GeoffH
Knowledge Base
18
May 28, 2009 09:09 AM
Tempest
Technical Discussion
18
Sep 5, 2006 11:33 AM
Stratman
Technical Discussion
4
Jul 1, 2006 02:24 AM




All times are GMT -7. The time now is 02:16 AM.