Leo vince fitment
evil man of nothing
MotoGP
Joined: Jan 2006
Posts: 4,516
From: Boynton Beach, FL
FYI I just got off the phone with LV after you PM'd me...they only still make a low mount. The mgr at LV said he hasn't seen a high mount system in years...nor are high mount replacement midpipes available 
Alum high mount systems may still be available elsewhere-you'd need to check around online and do a little homework. Again you could use those LV mufflers you told me about but you're going to need to have midpipes fabricated and you'll also need hangers for the mufflers.
Alum high mount systems may still be available elsewhere-you'd need to check around online and do a little homework. Again you could use those LV mufflers you told me about but you're going to need to have midpipes fabricated and you'll also need hangers for the mufflers.
Last edited by captainchaos; Dec 21, 2009 at 10:04 AM.
Senior Member
Superstock
Joined: May 2006
Posts: 302
From: New Mexico
http://www.exoticsportbike.com/vtr10...2897-05%29.htm
Just looked now and exoticsportbike.com shows an aluminum high-mount for our bikes....didn't try to purchase, could be just an out-dated website but might be worth investigating if you're interested. Glad I picked mine up when I did if they stopped making them.
Just looked now and exoticsportbike.com shows an aluminum high-mount for our bikes....didn't try to purchase, could be just an out-dated website but might be worth investigating if you're interested. Glad I picked mine up when I did if they stopped making them.
evil man of nothing
MotoGP
Joined: Jan 2006
Posts: 4,516
From: Boynton Beach, FL
You'll need the hangers too...too bad LV doesn't make the high mids anymore. When I called earlier today i think he said they only get $111 apiece for the low mids...he said he asked to keep the high carbon set in production but it just didn't happen.
Last edited by captainchaos; Dec 21, 2009 at 08:09 PM.
Thread Starter
Senior Member
SuperSport
Joined: Nov 2009
Posts: 677
From: Rancho Cordova, California
If they are selling an aluminum high mount for our bike, (which I saw on leo's site also) why wouldn't they be able to sell just the midpipe. The carbons I saw on e-bay had a wrap type hanger on them.
Thread
Thread Starter
Forum
Replies
Last Post
