Stock parts wanted
#1
Stock parts wanted
Im looking for the following:
Stock carb needles
Stock carb springs
Frame plastics in front of the carb. Part #1 and 3 in the picture. If you have the #22 pins that would be great also.
Trying to get the bike back to stock so it runs well.
Stock carb needles
Stock carb springs
Frame plastics in front of the carb. Part #1 and 3 in the picture. If you have the #22 pins that would be great also.
Trying to get the bike back to stock so it runs well.
#2
On the push pins
CLIP, BODY COVER
90683-GR1-003
They are under $2 each new, and I have yet to have one come out in a condition I wanted to reuse them on.
But I dont pay even that much for them... I go to my local auto body supplier place and pick up a bag of them for about $5
#3
Awesome! Let me know!
Cant wait to get this bugger running right. Right now its terrifying riding anywhere with it bucking like it does.
Cant wait to get this bugger running right. Right now its terrifying riding anywhere with it bucking like it does.
#7
#9
Got the needles and springs in today.
One needle was slightly bent on the tip but a quick adjustment was made and all was good.
On another note, GOOD LORD are those long stock springs much harder to get in there.
One needle was slightly bent on the tip but a quick adjustment was made and all was good.
On another note, GOOD LORD are those long stock springs much harder to get in there.
#10
I may have some more stock needles if you need a replacement for the replacements I sent you.
#11
Thanks but its ok, it was just off a tad. After a slight bend to correct they went into the carbs.
I thank you again for getting those out to me so fast!
I thank you again for getting those out to me so fast!
#12
The emulsion tubes are also different in each carb.
Thread
Thread Starter
Forum
Replies
Last Post
katryder1@gmail.com
Classifieds
5
10-30-2010 04:09 PM