hey guys its been a while but i got some work done had the carbs cleaned went in and checked the timeing all that stuff is good but still have the same problem around 6 to 7000 rpm if i get on the gas hevay it sputers falls on its face but if i am easy on the gas it is ok so someone pleas pleas pleas help help help

 

mods? im guessing lean since that around where the transition is in the jets depending on vacuum. anyone got that transition graph ready?

 

Are you running a stock air filter?

 

PVLIR....... the "had the carbs cleaned" is the clue......

 

You go from the pilots to the mains between 3-4K RPM

 

i thought you transition based on your throttle opening, not your RPM. if your getting hesitation at WOT i would suspect too small mains.

 

Very likely. You can't trust the techs now-a-days, even at the dealer. Learn how to do it yourself, if you have basic mechanical skills.

I've found they can't even torque an axle nut correctly, so I'm buying a front stand before I need tires again.