Rear Sets
Thread Starter
Junior Member
Squid
Joined: Jun 2010
Posts: 2
From: Ohio
Rear Sets
I have a 1998 Superhawk with a full Two Brothers Racing Exhaust (High Boys) I need the rear sets. Honda told me i have to loose the exhaust. and it would cost 350 for oem rear sets. I have seen VTR's with high boys and rear sets. Any info will be helpful.
V-Twin
V-Twin
Senior Member
SuperBike
Joined: Nov 2007
Posts: 1,216
From: Westerly, RI
Most of the high-mounts came with stand-offs for the rearsets.
For instance, my Jardines has stand-offs and longer bolts and an exhaust hanger that the bolts went through. A local machine shop should be able to turn and drill these in no time flat. The hex head bolts are availble at any of the home improvements shops. The exhaust hanger, either make one or see if the machine shop can work with you.
Hope this helps, a little.
For instance, my Jardines has stand-offs and longer bolts and an exhaust hanger that the bolts went through. A local machine shop should be able to turn and drill these in no time flat. The hex head bolts are availble at any of the home improvements shops. The exhaust hanger, either make one or see if the machine shop can work with you.
Hope this helps, a little.
Senior Member
SuperSport
Joined: Jul 2006
Posts: 655
From: Madison Wisconsin
I just cut the exhaust hanger part off and put jb weld on it made it smoth and it looked fine do a search i see pics of it on here that where not mine or I can get a shot for you in fact I think there is one of my bike here let me look.
https://www.superhawkforum.com/forum...ad.php?t=24074
Its about mid way down you will see it.
https://www.superhawkforum.com/forum...ad.php?t=24074
Its about mid way down you will see it.
Thread
Thread Starter
Forum
Replies
Last Post
