So finally getting the bike back together after 3 years and during that time I had to de-pin the Ignition Contol Module so I could move / clean up the wires to install a motogadget M unit. Well since some time has passed and I had to get a new phone and evidently not all of the old pictures transferred over. Is there anyone out there with an 01-05 ICM that wouldn’t mind taking a pic of the connector so I can see where what wires go where into the connector? Mainly only worried about TPS / Coolant temp / and power wire but a nice clear pic of the whole thing would be greatly appreciated. Thanks in advance.

 

Color diagram. Don't know if it is the same for bikes with the HISS feature.

 

I apricate the help. I have this schematic printed out and have been trying to determine what rows the wires go on. My '04 ECM is a bit different from the '99 one and that's the only picture I have been able to find and I want to make sure that I am placing them in the correct order and row so I don't potentially fry it, or the harness. that's why I was hoping someone wouldn't mind taking a picture of the back shell of the connector.

 

Ignition control unit. Looking at the back of the connector where the wires enter the connector.
Left to right
Top row: First pin empty, 2nd pin white/yellow, 3rd pin empty, forth pin pink/white, 5th pin yellow, 6th pin light green, 7th pin yellow/black, 8th pin black/blue
Bottom row: First pin yellow/green, 2nd pin green, 3rd pin green/black, 4th pin empty, 5th pin black/white, 6th pin green/white, 7th pin red/yellow, 8th pin black/yellow
This is from a non HISS bike. The wire colors match with the diagram I posted.

 

You’re my hero! I was about to buy a harness off eBay in the morning because this is the last piece of info I needed to get the bike running. Thanks for putting in the time type that all out for me.