Front sprocket
#1
Front sprocket
I was just cleaning my drive chain and found out theres a little bit of play in the front sprocket. The play is side to side like if there was missing a washer. I checked in the maintenance manual and there should only be one washer...which I have. Has anyone run into a similar problem? Is this common to this bike? This is the first time I have taken these apart and I want to make shure there's nothing missing. Thanks in advance.
#2
I replaced my chain and sprockets recently. I did measure .011" freeplay on the stock sprocket, and my aftermarket replacement had about .014".
So to answer your question...yes it is normal.
So to answer your question...yes it is normal.
Thread
Thread Starter
Forum
Replies
Last Post
duran
Technical Discussion
16
08-27-2007 07:57 AM
Tempest
Technical Discussion
3
09-20-2006 07:35 PM