Technical Discussion Topics related to Technical Issues

carb issue

Thread Tools
 
Search this Thread
 
Old Aug 2, 2011 | 06:56 PM
  #1  
3amta3's Avatar
Thread Starter
Jack of all Master of non
Superstock
 
Joined: May 2011
Posts: 297
From: Jacksonville,fl
3amta3 is on a distinguished road
carb issue

ok all other stuff figured out now i have a problem with my carbs. now with the carbs at low take off acceleration the carbs have a gargul and a slight rattle once above 2500 rpm all seams normal.
do you have the filters in the air cleaner for the carb valves? it sounds like to me that the diaphragm slider is making that noise but not sure how to fix it... any help?
Old Aug 2, 2011 | 07:11 PM
  #2  
8541Hawk's Avatar
Banned
MotoGP
 
Joined: Aug 2007
Posts: 5,942
From: Lake View Terrace, CA
8541Hawk will become famous soon enough
Well it is an "Internet Noise" so it makes it real hard but what it sounds like to me is you are hearing the carbs slides open and close. That is why it goes away at above 2500 RPM.

So I would say it is just a normal "SH noise" and not to worry about it.
Old Aug 2, 2011 | 08:16 PM
  #3  
7moore7's Avatar
Senior Member
MotoGP
 
Joined: Jul 2010
Posts: 3,871
From: Phoenix, AZ
7moore7 is on a distinguished road
Can't tell if it's a question, but you should have those little trapezoid foam filters in the airbox for the carb slides. Otherwise they're exposed to whatever gets sucked in there...
Old Aug 3, 2011 | 05:23 AM
  #4  
3amta3's Avatar
Thread Starter
Jack of all Master of non
Superstock
 
Joined: May 2011
Posts: 297
From: Jacksonville,fl
3amta3 is on a distinguished road
i noticed today that the carb noise goes away the warmer the bike is too.... i have herd you can seal one of the holes on the slider to help fix the issue, what do you guys think? other than this problem she is running like a top. i guess it is just me being critical.

has anyone herd of converting a SH to fuel injected?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AK Ronin
Technical Discussion
6
May 19, 2011 08:20 PM
FastRED
Technical Discussion
35
May 11, 2011 01:45 PM
poppazuti
Technical Discussion
13
Oct 6, 2010 07:26 AM
dshakes
Technical Discussion
36
Jun 16, 2010 03:21 AM
skoshere
Technical Discussion
65
May 28, 2010 09:33 PM




All times are GMT -7. The time now is 07:25 AM.


Top

© 2026 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.