98 super hawk has all power and lights nothing when I hit start button
08-25-2022, 03:54 AM
#1
Junior Member
Squid
Thread Starter
Join Date: Aug 2022
Posts: 1
98 super hawk has all power and lights nothing when I hit start button
So I got a bike in on trade didn’t run when I got I have it all back together put the key in all light work head light dash light all work if I hit the button nothing but if I jump the selnoid it turns over Wht do I do I have switch apart it looks good clicks in all even makes the head light dem a lil when I hit it plzz helpp
08-25-2022, 02:03 PM
#2
Well take off, eh.
SuperBike
Join Date: Jun 2012
Location: QC, Canada
Posts: 1,201
When you say you jumped the solenoid, do you mean you took a wire, and bypassed the fuse?
I'd start with the basics, check your battery. If you have anything lower than 12.4v at rest, it's starting to be low. Leave your tester on, and try starting the bike, if you see voltage drop
in the single digits, replace your battery.
I'd start with the basics, check your battery. If you have anything lower than 12.4v at rest, it's starting to be low. Leave your tester on, and try starting the bike, if you see voltage drop
in the single digits, replace your battery.
Thread
Thread Starter
Forum
Replies
Last Post
