CBR or aftermarket cam chain tensioner?
01-02-2006, 09:56 PM
#1
Senior Member
Superstock
Thread Starter
Join Date: Dec 2005
Posts: 428
CBR or aftermarket cam chain tensioner?
I read a CBR tensioner can be used and is much better but don't know what model. Also are there any aftermarket units that are affordable and good? No manual adjusting units please.
01-05-2006, 02:16 AM
#4
Senior Member
Back Marker
Join Date: Aug 2004
Location: Belgium
Posts: 203
Re: CBR or aftermarket cam chain tensioner?
Do not want to dissapoint you guys, but practically ALL CB-series CCTs by Honda exactly same, only form of rod end differs. And - CBR600F4i and X11 and SuperBlackbird also have some percentage suffering from CCT issues. Just get ones with orange dot and change them every 30 000 km and you will be OK (unless you drive on overrunb all the time).
01-05-2006, 06:15 AM
#5
Senior Member
Superstock
Thread Starter
Join Date: Dec 2005
Posts: 428
I heard they were better but they look to be the same style and I think better just means a later revision than what my 1998 model has. On my Kawi I've upgraded to a ratcheting type and its great! I wish Honda had a ratcheting type to fit.
Even though a shop should sell the updated CCT I wouldn't put it past them to sell you an NOS unit from 1998 so make sure you get the newer part number. I figure if you ask for two 05 919 units they have to give you the latest stuff.
Even though a shop should sell the updated CCT I wouldn't put it past them to sell you an NOS unit from 1998 so make sure you get the newer part number. I figure if you ask for two 05 919 units they have to give you the latest stuff.
Thread
Thread Starter
Forum
Replies
Last Post
