Carb to EFI conversion?
#1
Carb to EFI conversion?
I was wondering if anybody out there has made an attempt at switching out the carburator to an electronic fuel injection system? I was thinking I might try doing this sometime using the throttle body off of a RC51, but thought I'd ask first.
#2
Re: Carb to EFI conversion?
Do a search as I beleive this issue has been tackled before. Of the top of my head, I seriously doubt it is possible without some major work and new components. It would likely be easier to simply replace the engine altogether.
If I may, what it is exactly you would be hoping to achieve with the switch? I ask as a well-calibrated carb is still pretty hard to beat in terms of response and predictability (althought he new EFI systems seem to function quite well).
It just occurred to me that the European Varadero version of this engine may have been available in an EFI version. You may want to look into that avenue as being your most feasible option.
Mikstr
If I may, what it is exactly you would be hoping to achieve with the switch? I ask as a well-calibrated carb is still pretty hard to beat in terms of response and predictability (althought he new EFI systems seem to function quite well).
It just occurred to me that the European Varadero version of this engine may have been available in an EFI version. You may want to look into that avenue as being your most feasible option.
Mikstr
#3
it's gonna be harder then just using the throttle body off of the rc51.... I wondered this myself just cause I don't like dealing with carbs even though they will function just as well as efi systems when tuned perfectly...
#4
Re: Carb to EFI conversion?
From my research on the internet I've seen that any carburated engine can be converted to EFI. The easiest way to go about this is to find all of the components you need off of a "donor" vehicle. I have also seen that carburated engines that are converted to EFI put out more horsepower and torque. Once more a EFI engine can be calibrated so much easier and faster with a Power Commander.
Thanks for the tip about the Varadero, I'll take a look into that.
Thanks for the tip about the Varadero, I'll take a look into that.
#6
Re: Carb to EFI conversion?
Varadero was indeed fuel injected. Here is a link to a new Power Commander map for it:
http://www.powercommander.com/116-411.shtml
Varadero specs: http://www.honda-varadero-uk.org/tech_spec_99.htm ( (includes useful info about introduction of FI version in 2003)
power ratings for FI version:
The fuel-injected edition is rated at 69kW at 8000rpm with 98Nm at 6000; (if anyone can convert that into hp and ft-lbs)
comp. ratio: 9.8:1 on FI version
You can search on Google for more.
Hope this helps
Mikstr
http://www.powercommander.com/116-411.shtml
Varadero specs: http://www.honda-varadero-uk.org/tech_spec_99.htm ( (includes useful info about introduction of FI version in 2003)
power ratings for FI version:
The fuel-injected edition is rated at 69kW at 8000rpm with 98Nm at 6000; (if anyone can convert that into hp and ft-lbs)
comp. ratio: 9.8:1 on FI version
You can search on Google for more.
Hope this helps
Mikstr
#7
Re: Carb to EFI conversion?
69kw is 93hp.
98nm is 72 ft/lb.
These figures are most probably measured at the engine, not the wheel too I would think.
Obviously this engine has different design parameters compared to the VTR. Having 42mm throtte bodies will assist torque figures, however you would expect this to limit horsepower, and the above figures reflect that.
Given the above it would be fair to assume (though of course not certain) that the manifold would be of appropriate design in accordance with the rest of the fuel system, that is, of smaller size to match the throttle body.
Would this be too small to suit the road based VTR?
Could it be ported to make up the diiference if required?
Given that keihin FCR carb concervions tend to be 41mm from the ones I have seen, and that the HRC jet kit blocks off the main air jet, it is possible that this conversion may be of benefit to the VTR.
I think you should do it!
98nm is 72 ft/lb.
These figures are most probably measured at the engine, not the wheel too I would think.
Obviously this engine has different design parameters compared to the VTR. Having 42mm throtte bodies will assist torque figures, however you would expect this to limit horsepower, and the above figures reflect that.
Given the above it would be fair to assume (though of course not certain) that the manifold would be of appropriate design in accordance with the rest of the fuel system, that is, of smaller size to match the throttle body.
Would this be too small to suit the road based VTR?
Could it be ported to make up the diiference if required?
Given that keihin FCR carb concervions tend to be 41mm from the ones I have seen, and that the HRC jet kit blocks off the main air jet, it is possible that this conversion may be of benefit to the VTR.
I think you should do it!
#8
Re: Carb to EFI conversion?
From my research on the internet I've seen that any carburated engine can be converted to EFI. The easiest way to go about this is to find all of the components you need off of a "donor" vehicle. I have also seen that carburated engines that are converted to EFI put out more horsepower and torque. Once more a EFI engine can be calibrated so much easier and faster with a Power Commander.
Thanks for the tip about the Varadero, I'll take a look into that.
Thanks for the tip about the Varadero, I'll take a look into that.
I agree.... I'm sure it can be done but wiring in the computer or power commander might be the most difficult part...
#9
you know I was just looking at the rc51 throttle bodies and I think that they could easily fit onto our current setup... once again wiring would probably be the hardest.... Don't EFI bikes have fuel pumps too and ours is just gravity driven?? (not really sure...)
and do the power commanders completely take over the computer setup or what? I'm not really familiar with how they exactly work... If so that's awesome... If they run as a kind've piggy back off the original computer then that could cause issues and another tuning device might be needed...
I talked to some other people and we all agreed that if a conversion was to be done that a stand alone computer would be by far the best thing to do to give absolute control and get past some bs that a conversion normally has... someone else make the conversion first and I'll be right behind you
and do the power commanders completely take over the computer setup or what? I'm not really familiar with how they exactly work... If so that's awesome... If they run as a kind've piggy back off the original computer then that could cause issues and another tuning device might be needed...
I talked to some other people and we all agreed that if a conversion was to be done that a stand alone computer would be by far the best thing to do to give absolute control and get past some bs that a conversion normally has... someone else make the conversion first and I'll be right behind you
#10
http://www.megasquirt.info/
With megasquirt, you can build your own custom EFI system with ignition control also.
if you look in their forums, they have a motorcycle only section.
With megasquirt, you can build your own custom EFI system with ignition control also.
if you look in their forums, they have a motorcycle only section.
#12
Re: Carb to EFI conversion?
I think you wil find that RC51 will not fit, due to the engine being different dimensions, therefore plenum/manifold would need to be modified or another custom made.
If you are going to go this route provision for sensors will need to be made, and as you suggest, a computer to run it will be required.
Definately able to be done, but you would want to be keen.
If you are going to go this route provision for sensors will need to be made, and as you suggest, a computer to run it will be required.
Definately able to be done, but you would want to be keen.
#13
Re: Carb to EFI conversion?
I have the VFR tank on my bike so I won't have any problem putting the fuel pump from the VFR on as well. The problem seems to be finding a location to buy the throttle body for the Varadero. Anybody know were I can get one?
Thread
Thread Starter
Forum
Replies
Last Post
CentralCoaster
General Discussion
22
03-04-2009 10:45 PM
carb, conversion, conversions, custom, easiest, efi, fcr, fuel, honda, injection, measured, mega, motorcycle, squirt, superhawk