Fitted LEDs To Fairing
01-12-2014, 12:05 AM
#1
Senior Member
SuperBike
Thread Starter
Join Date: Mar 2012
Location: New South Wales Australia
Posts: 1,544
Fitted LEDs To Fairing
These are neat and now I have LEDs all round.
Cheap from flea bay, and realy bright.
Sharpen up the bike and gives it a modern look in my opinion.
So now I have integrated clear tail light, tidied up tail with stainless mini under tray, and flush mounts on the fairings.
Much tidier I think.
Now I need a single seat cowl.
The quest never ends!!!!!!!!!!!!!!!
Cheap from flea bay, and realy bright.
Sharpen up the bike and gives it a modern look in my opinion.
So now I have integrated clear tail light, tidied up tail with stainless mini under tray, and flush mounts on the fairings.
Much tidier I think.
Now I need a single seat cowl.
The quest never ends!!!!!!!!!!!!!!!
01-12-2014, 07:18 AM
#2
Senior Member
Superstock
Join Date: Aug 2013
Location: Everett, Washington
Posts: 295
Those look real good, Kenmore. Did you need to add resistors to make them work? Are they pretty bright in daylight? I like those flush mount turn signals but worry that they aren't visible enough looking directly at the front of the bike.
I think there's a red seat cowl on Ebay right now.
I think there's a red seat cowl on Ebay right now.
01-12-2014, 11:22 AM
#3
Senior Member
SuperBike
Thread Starter
Join Date: Mar 2012
Location: New South Wales Australia
Posts: 1,544
I fitted an led flasher can.
They seem to be bright enough .
Wifey says that you can see them from the front o.k.
Even with the ugly old ones I always assumed that tin tops didn't see them and I am super cautious in traffic to the extent that I am about to fit a compact air horn as well after nearly being knocked of my bike by a Mr Magoo in a tin top.
Every little bit helps.
They seem to be bright enough .
Wifey says that you can see them from the front o.k.
Even with the ugly old ones I always assumed that tin tops didn't see them and I am super cautious in traffic to the extent that I am about to fit a compact air horn as well after nearly being knocked of my bike by a Mr Magoo in a tin top.
Every little bit helps.
01-12-2014, 12:34 PM
#5
Senior Member
MotoGP
Join Date: Jul 2007
Location: NYC
Posts: 5,033
Those are Lockhart phillips turn 6 lights. I have those & wired them to be running lights and turn signals. The running lights add tons of conspicuity at night.
Convert 2 wire signals to 3 Wire Inputs - CBR Forum - Enthusiast forums for Honda CBR Owners
Convert 2 wire signals to 3 Wire Inputs - CBR Forum - Enthusiast forums for Honda CBR Owners
01-12-2014, 03:47 PM
#7
Senior Member
Back Marker
Join Date: Apr 2013
Location: Florida
Posts: 120
Those are Lockhart phillips turn 6 lights. I have those & wired them to be running lights and turn signals. The running lights add tons of conspicuity at night.
Superhawk lights and speedo - YouTube
Convert 2 wire signals to 3 Wire Inputs - CBR Forum - Enthusiast forums for Honda CBR Owners
Superhawk lights and speedo - YouTube
Convert 2 wire signals to 3 Wire Inputs - CBR Forum - Enthusiast forums for Honda CBR Owners
Thread
Thread Starter
Forum
Replies
Last Post
Randman
Modifications - Cosmetic
3
06-12-2006 07:01 PM
