View Poll Results: VTROTM 8/11
sparxx
23
76.67%
ckoscin
2
6.67%
AngryOlaf
0
0%
firedog55
4
13.33%
AK Ronin
1
3.33%
Voters: 30. You may not vote on this poll
VTR of the Month August 2011
#1
VTR of the Month August 2011
Congratulations to sparxx for winning the August VTROTM!
[/QUOTE]
A BIG thanks to everybody who participated in June's VTROTM, If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory!
[/QUOTE]
A BIG thanks to everybody who participated in June's VTROTM, If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory!
Last edited by 8541Hawk; 09-03-2011 at 10:39 AM.
#2
Ok I'm in
Finally my build is complete. Still want to do some things but that'll come (rear shock etc). When I finished the build my engine had problems and the rear cilinder broke down. But now I got another engine now and it runs perfect. Want to do a dynorun asap, so I know it runs well and know the poweroutput. Here's my entry..
Name
Robin (See my previous bikes/builds @ Motorstek - Sparxx )
Year
1998, 1999 engine
Colors
Honda Racing Coorperation (HRC) color theme. Red White and blue. The blue color is a metallic one from Audi.
Mods/Tech
- Powdercoated wheels, frame, triples, engine covers and radiators
- 900RR brace mod, hugger and rearbrake adapter
- Custom subframe
- Custom 600RR rear (race), 600RR seat, taillight and custom LED indicators
- USD Front end (1000RR Fireblade) with Hyperpro progressive springs, radial brakes with steel braided brake lines. 1000RR clip-ons, 600RR fender
- 929RR rotors (330mm)
- Hyperpro steering damper
- 900RR Adjustable rearset (+ adapter plates)
- H.I.S.S system cover
- Mirrors
- Streetfighter frontlight
- HRC tankpad and fuelcap cover
- Custom exhaust system, Leovince SBK slip-on (1000RR Fireblade) with custom licenseplate holder
- Manual cam chain tensioners
- Tuning following the specs of a German tuner: Open airfilter (pretty much the same as a pipercross), Carb tuning, HRC mod.
- Koso DB01 instruments
- Garmin Zumo 220 nav system
Finally my build is complete. Still want to do some things but that'll come (rear shock etc). When I finished the build my engine had problems and the rear cilinder broke down. But now I got another engine now and it runs perfect. Want to do a dynorun asap, so I know it runs well and know the poweroutput. Here's my entry..
Name
Robin (See my previous bikes/builds @ Motorstek - Sparxx )
Year
1998, 1999 engine
Colors
Honda Racing Coorperation (HRC) color theme. Red White and blue. The blue color is a metallic one from Audi.
Mods/Tech
- Powdercoated wheels, frame, triples, engine covers and radiators
- 900RR brace mod, hugger and rearbrake adapter
- Custom subframe
- Custom 600RR rear (race), 600RR seat, taillight and custom LED indicators
- USD Front end (1000RR Fireblade) with Hyperpro progressive springs, radial brakes with steel braided brake lines. 1000RR clip-ons, 600RR fender
- 929RR rotors (330mm)
- Hyperpro steering damper
- 900RR Adjustable rearset (+ adapter plates)
- H.I.S.S system cover
- Mirrors
- Streetfighter frontlight
- HRC tankpad and fuelcap cover
- Custom exhaust system, Leovince SBK slip-on (1000RR Fireblade) with custom licenseplate holder
- Manual cam chain tensioners
- Tuning following the specs of a German tuner: Open airfilter (pretty much the same as a pipercross), Carb tuning, HRC mod.
- Koso DB01 instruments
- Garmin Zumo 220 nav system
Last edited by Sparxx; 08-04-2011 at 07:54 AM.
#7
here is my 1998 VTR with 12k miles on it now it has 13 some
just picked her up in June
nothing really done to it. i added a hid kit and that's about it.
used to be red (i think) with a nice orange and black paint now.
second pic shows the led's it came with. if i was out about an hour later it looks better.
two brothers exhaust with custom high mount. blacked out windshield and signals in mirrors. under tail kit and flush mount turns.
Uploaded with ImageShack.us
if i forget anything ill add it later.....Thanks guys for looking
just picked her up in June
nothing really done to it. i added a hid kit and that's about it.
used to be red (i think) with a nice orange and black paint now.
second pic shows the led's it came with. if i was out about an hour later it looks better.
two brothers exhaust with custom high mount. blacked out windshield and signals in mirrors. under tail kit and flush mount turns.
Uploaded with ImageShack.us
if i forget anything ill add it later.....Thanks guys for looking
#8
Oops! Almost missed my chance to get back in the running...
AngryOlaf's '00 Superhawk...
(more images to follow...)
Enjoy!
- Mike
AngryOlaf's '00 Superhawk...
- Daugherty Motorsports modified F4i shock.
- Stock Forks w. Racetech Gold valves (compression) and Sonic Springs
- Superbrace
- Galfer SS Lines (brakes/clutch)
- Galfer rear rotor
- EBC HH pads
- Helibars
- Corbin Seat (optional Gunfighter backrest for the Mrs.)
- Puig DB Smoke screen
- Dunlops - Q front Q2 rear
- Yoshimura TI Exhaust (slip-on)
- APE CCTs
- RK Chain
- Reckless Fiberglass Hugger in flat black
- GiPro X Type Gear Indicator
- Majestic untrimmed OEM rear fender, stock turn signals and reflectors!
- Scraped up right side provided by the previous owner
(more images to follow...)
Enjoy!
- Mike
#9
#11
Since I'm done ,finally, and you guys have caused me to spend more money on my old SHawk than it's worth I'll give VTROTM a shot.
NAME:
Lee
YEAR:
1999, 9,711 miles
COLOR:
Chrysler "Blaze" red, black and silver TapeWorks graphics under clear coat.
MODS/TECH:
-JDM/Racetech forks
-JDM/Racetech CBR 600 F4i shock
-JDM billet shift lever
-CBR 6 spoke wheels, All ***** bearings/seals, Dunlop Q2s
-APE CCTs
-R1 Mosfet R/R
-Gel battery
-Factory Pro jet kit
-Factory Pro shift kit
-Factory Pro 4 degree ign. adv.
-TBR CF high slip ons
-TBR billet block off plates (dePAIRED)
-Vortex billet gas cap
-Pazzo shorty levers
-Zero Gravity smoked DB wind screen
-Flush mount signals front, mini arrows rear
-Chopped front and rear fenders
-RC 51 (SP1) front brake calipers, CBR 954 MC
-Galfer SS lines, brakes and clutch
-Galfer wave rotors, Vesrah pads
-SS fastener kit off eBay
-520 gold DID ZVM chain, Afam 16 tooth counter shaft , SuperSprox 44 tooth rear
-Coerce Racing billet fork brace
-Coerce Racing billet counter shaft cover
-Coerce Racing CF rear hugger
-CompetitionWerks GP footpegs
-K&N air and oil filters, Mobil 1 4T
-Misc. CF parts
My little "Princesses"
NAME:
Lee
YEAR:
1999, 9,711 miles
COLOR:
Chrysler "Blaze" red, black and silver TapeWorks graphics under clear coat.
MODS/TECH:
-JDM/Racetech forks
-JDM/Racetech CBR 600 F4i shock
-JDM billet shift lever
-CBR 6 spoke wheels, All ***** bearings/seals, Dunlop Q2s
-APE CCTs
-R1 Mosfet R/R
-Gel battery
-Factory Pro jet kit
-Factory Pro shift kit
-Factory Pro 4 degree ign. adv.
-TBR CF high slip ons
-TBR billet block off plates (dePAIRED)
-Vortex billet gas cap
-Pazzo shorty levers
-Zero Gravity smoked DB wind screen
-Flush mount signals front, mini arrows rear
-Chopped front and rear fenders
-RC 51 (SP1) front brake calipers, CBR 954 MC
-Galfer SS lines, brakes and clutch
-Galfer wave rotors, Vesrah pads
-SS fastener kit off eBay
-520 gold DID ZVM chain, Afam 16 tooth counter shaft , SuperSprox 44 tooth rear
-Coerce Racing billet fork brace
-Coerce Racing billet counter shaft cover
-Coerce Racing CF rear hugger
-CompetitionWerks GP footpegs
-K&N air and oil filters, Mobil 1 4T
-Misc. CF parts
My little "Princesses"
Last edited by firedog55; 08-15-2011 at 08:00 PM. Reason: Added info.
#15
It's gonna be hard to compete with these guys
but here...we....go...
I'm Tyler
This is my baby, Ronin (RON1N as indicated by the Lisence plate )
1998
Red
Mods/Tech specs
-Dark Smoked Double Bubble Windscreen
-HID with Morimoto bi-xenon projection system (broken CCFL angel eye )
-Blue 3rd Eye
-Hyper blue Click 'n Roll Clutch and Brake
-Carbon Fiber (Older) CBR 1000rr Mirrors (before the integrated turn signals)
-Braided Clutch and Brake lines
-Michelin Pilot 2's with Dyna Beads
-Heli Bars
-Heated Grips
-Sportech Ronin Tank protector
-Light Blue anodized Ti windscreen Bolts
-Dark Blue anodized Ti Fairing Bolts
-Old school Frame Sliders
-Carbon Tripple Tree Cover
-Carbon Gas Tank Cover
-Sargent Seat
-Flush Mounted Front Turn signals
-Fender Eliminated
-Integrated rear turn signals into LED Brake light
-Steering Dampner
Engine/Final Drive
-BMC Air Filter
-Stage 3 Jet Kit
-Shimmed Needles with added washers
-Solo Hole on the slide (Thanks Mikstr!)
-16/43 conversion
-520 EK Red Chain
-Driven Sprockets, +2 teeth on the rear (as stated above), Anodized Blue Al rear with Steel front, Holes drilled for decrease in weight
-D&D Black Satin Exhausts
Graphics
-A lot of work from Tapeworks! Reflective graphics with the RC51 scheme in blue and white. A shoutout to my Euro and Asian Buddies with Firestorm in Kanji on the Rear Cowl and Windscreen. 907 Noble, Left and Right Respectively. De-badged with 1000 in Kanji under the seat on the Rear Fairing. Notice that the Decals match the Clutch and brake in the reflective and the fairing bolts in the non-reflective! Thanks Tapeworks! Rob is LEGIT!
My blue LED underglow electrical has been giving me issues as of late, Looks like I get to tinker with that later.
I'd just like to say thanks to everyone on the forum for all of your help!
8541 Hawk
Tweety
and Mikstr Especially!
Thanks guys! and Enjoy!
but here...we....go...
I'm Tyler
This is my baby, Ronin (RON1N as indicated by the Lisence plate )
1998
Red
Mods/Tech specs
-Dark Smoked Double Bubble Windscreen
-HID with Morimoto bi-xenon projection system (broken CCFL angel eye )
-Blue 3rd Eye
-Hyper blue Click 'n Roll Clutch and Brake
-Carbon Fiber (Older) CBR 1000rr Mirrors (before the integrated turn signals)
-Braided Clutch and Brake lines
-Michelin Pilot 2's with Dyna Beads
-Heli Bars
-Heated Grips
-Sportech Ronin Tank protector
-Light Blue anodized Ti windscreen Bolts
-Dark Blue anodized Ti Fairing Bolts
-Old school Frame Sliders
-Carbon Tripple Tree Cover
-Carbon Gas Tank Cover
-Sargent Seat
-Flush Mounted Front Turn signals
-Fender Eliminated
-Integrated rear turn signals into LED Brake light
-Steering Dampner
Engine/Final Drive
-BMC Air Filter
-Stage 3 Jet Kit
-Shimmed Needles with added washers
-Solo Hole on the slide (Thanks Mikstr!)
-16/43 conversion
-520 EK Red Chain
-Driven Sprockets, +2 teeth on the rear (as stated above), Anodized Blue Al rear with Steel front, Holes drilled for decrease in weight
-D&D Black Satin Exhausts
Graphics
-A lot of work from Tapeworks! Reflective graphics with the RC51 scheme in blue and white. A shoutout to my Euro and Asian Buddies with Firestorm in Kanji on the Rear Cowl and Windscreen. 907 Noble, Left and Right Respectively. De-badged with 1000 in Kanji under the seat on the Rear Fairing. Notice that the Decals match the Clutch and brake in the reflective and the fairing bolts in the non-reflective! Thanks Tapeworks! Rob is LEGIT!
My blue LED underglow electrical has been giving me issues as of late, Looks like I get to tinker with that later.
I'd just like to say thanks to everyone on the forum for all of your help!
8541 Hawk
Tweety
and Mikstr Especially!
Thanks guys! and Enjoy!
#18
Really close this month and there were bits that I liked about each one. I voted for Firedog though. What pushed me over the top was the smokin hot models he included in the pics. Get back to me in 20 years. One of them may make a good wife for my grandson!
Thread
Thread Starter
Forum
Replies
Last Post
inderocker
Members Rides
17
09-20-2010 01:11 AM