light bulb exchange
#1
light bulb exchange
I just brought a used super hawk recently and my bright light just went out. Can someone run down the procedure to me on how to exchange it out. At first I was going to pull it out but then realize that it seems as though a spring is holding it in place. I have a 2001 Hawk, Super. Need some help since the lighting isn't that great with the high beam.
#2
- Reach down to where the wiring harness plugged in.
- Pull off the dust cover.
- Reach in from the clutch side with your right hand, and grip the "spring" between your thumb and forefinger.
- Squeeze your thumb and forefinger together (the pointer should be the one actually moving), and you will "unhook" the retainer clip.
- The clip will rotate out of the way, and the bulb should come out easily.
Congrats on the purchase!
- Pull off the dust cover.
- Reach in from the clutch side with your right hand, and grip the "spring" between your thumb and forefinger.
- Squeeze your thumb and forefinger together (the pointer should be the one actually moving), and you will "unhook" the retainer clip.
- The clip will rotate out of the way, and the bulb should come out easily.
Congrats on the purchase!
Thread
Thread Starter
Forum
Replies
Last Post
joshuatest
General Discussion
2
10-27-2008 04:44 PM
Ausie996
Modifications - Performance
2
04-21-2007 04:13 AM