T-rex sliders
Member
Squid
Joined: Apr 2009
Posts: 45
From: Wilcox, Pa
Yeah I just put a pair on my 2001 SuperHawk. They look great. They only problem I had with them was threading the slider bolt into the metal bracket they give you to mount onto the frame. I ended up just using a smaller size standard bolt then putting a lock washer and nut on the back side. Other than that they work and look great.
Senior Member
Back Marker
Joined: Aug 2007
Posts: 105
From: Hudson Valley, New York
They should work on all Superhawks; there's no difference in the bodywork or frame where the Trex sliders are mounted. I've got 'em on my '99 for over a year now with no problems at all.
Thread Starter
Senior Member
Back Marker
Joined: Jan 2009
Posts: 224
From: Hills of Kentucky
Senior Member
Back Marker
Joined: Mar 2005
Posts: 104
From: Ohio
I crashed on each side on the track late last year (about 70mph on one and 120ish on the other) and they're still in good shape. Good deal, and cheap too. I can tell you that the steel plate they bolt to will bend if you put your bike down hard enough, but you can straighten it back out with an anvil and hammer, and respray.
Thread
Thread Starter
Forum
Replies
Last Post
