For Sale - 98 VTR1000F with lots of mods
#1
For Sale - 98 VTR1000F with lots of mods
Hey if you guys know of anyone interested in an excellently maintained and modified 98 VTR1000F, please send them my way.
Asking $3,650 (will not ship, will meet within 100 miles of Nashville, TN) Cash Only (I will not part out, so don't ask)
She needs a new home and has a ton of nice add-on and mods. Needs nothing and runs perfect.
Bike is perfect and never raced.
-Corbin Seat
-LP signals
-Jardine High mount Exhaust with Wrapped headers
-Two Brothers SMOG block off plates with all smog stuff removed
-Rear Fender mod
-New Chain (DID o-ring) Sprockets are like new
-Signal Dynamics Head light modulator
-GSX/R 1000 Front 6 – pot front calipers
-GSX/R Radial Master Cylinder
-Steel braided Brake and clutch lines
-K&N Air Filter
-Factory Pro Ti Jet kit tuned perfect top to bottom rpm range
-Factory Pro Ignition Advance
-APE Manual Cam Chain Adjusters
-Remote Carb Sync lines ran for easy carburetor Sync
-Vesrah HH Pads
-RaceTech Gold Valves in Forks
-RaceTech fork springs for 190 lbs rider
-Custom Vinyl graphics
-SRC Fork Brace
-Stripped and polished wheels
-Nearly new tires
-Mirror Extenders
-VFR Voltage Regulator
-Modulating Rear Brake Light
-Safety Wired for looks (never raced)
-Rear passenger pegs and brackets removed, but can easily be re-installed
-Smoke Double Bubble windscreen
(rear stand not included)
Asking $3,650 (will not ship, will meet within 100 miles of Nashville, TN) Cash Only (I will not part out, so don't ask)
She needs a new home and has a ton of nice add-on and mods. Needs nothing and runs perfect.
Bike is perfect and never raced.
-Corbin Seat
-LP signals
-Jardine High mount Exhaust with Wrapped headers
-Two Brothers SMOG block off plates with all smog stuff removed
-Rear Fender mod
-New Chain (DID o-ring) Sprockets are like new
-Signal Dynamics Head light modulator
-GSX/R 1000 Front 6 – pot front calipers
-GSX/R Radial Master Cylinder
-Steel braided Brake and clutch lines
-K&N Air Filter
-Factory Pro Ti Jet kit tuned perfect top to bottom rpm range
-Factory Pro Ignition Advance
-APE Manual Cam Chain Adjusters
-Remote Carb Sync lines ran for easy carburetor Sync
-Vesrah HH Pads
-RaceTech Gold Valves in Forks
-RaceTech fork springs for 190 lbs rider
-Custom Vinyl graphics
-SRC Fork Brace
-Stripped and polished wheels
-Nearly new tires
-Mirror Extenders
-VFR Voltage Regulator
-Modulating Rear Brake Light
-Safety Wired for looks (never raced)
-Rear passenger pegs and brackets removed, but can easily be re-installed
-Smoke Double Bubble windscreen
(rear stand not included)
#11
No worries the SuperHawk is safe and dry from the event.
I need to put the battery in her and check the mileage. i beleive she has around 24k on her and i bought her used with only 400 miles on her. The original owner had her just a few months and decided he was not into motorcycles.
She is a sweet ride and i actually hate to sell her, but i am getting older and seem to enjoy the traditional setup handle bar style bikes more now. The Superhawk has clip-ons, but they are not as radical as an RC51, CBR600, GSXR1000 so they are still easy on the wrist.
I will check the mileage and report back. She has been winterized and covered in the garage all winter.
#12
OK, please let me know, I have owned many bikes, currently have an 99 R1 and sold a Suzuki TL1000s. I do not mind taking my time searching for that special hawk, please send more pics of both sides of the bike etc, what would you rate the overall cond on a scale of one to ten, original body work, never been down etc? I am interested, step by step. I admit that I'm very picky and take great pride of ownership. LOL Thanks again!
#13
GSXR1000 Radial MC
Wrapped SS
Getting New "All *****" steering bearing a few years ago.
Front Angle (I have since removed the Silver that i installed. You can not even tell i had the vinyl on the bike) All graphics are stuff i made by hand using Avery A7 hign end vinyl.
You can also see the mirror extenders that several of us old RLZ forum members went in on. A former member made them for us. as well you can barely see the group buy Summers Racing components Fork Brace
Wrapped SS
Getting New "All *****" steering bearing a few years ago.
Front Angle (I have since removed the Silver that i installed. You can not even tell i had the vinyl on the bike) All graphics are stuff i made by hand using Avery A7 hign end vinyl.
You can also see the mirror extenders that several of us old RLZ forum members went in on. A former member made them for us. as well you can barely see the group buy Summers Racing components Fork Brace
Last edited by Thumper; 05-03-2010 at 07:39 PM.
#14
This is one clean SH. I hate to see you get rid of her but the new ride is real nice.
Now if I could just find time to get out one of these nice days for a ride. Haven't got out yet this year.
Now if I could just find time to get out one of these nice days for a ride. Haven't got out yet this year.
#18
Thumper, new to the forum. I PM'ed you and was wondering if you still have this most gorgeous bike.
I put some details in my message so will leave it private.
Great site guys, Ive been on FZ1OA & the VFRWORLD for years and never knew you guys were here!
Cheers.
Rich in Cary, NC.
ps-- hope you are OK in Nashville, we just moved from Memphis the week before the flooding and saw the devastation of your wonderful city on TV. Nashville beats Memphis any day.........
I put some details in my message so will leave it private.
Great site guys, Ive been on FZ1OA & the VFRWORLD for years and never knew you guys were here!
Cheers.
Rich in Cary, NC.
ps-- hope you are OK in Nashville, we just moved from Memphis the week before the flooding and saw the devastation of your wonderful city on TV. Nashville beats Memphis any day.........
Thread
Thread Starter
Forum
Replies
Last Post
MC Leather
Classifieds
3
08-11-2012 08:38 AM
Zedicus
General Discussion
16
02-05-2007 08:39 PM