Sticky Speedo
12-13-2006, 02:54 PM
#1
Senior Member
Back Marker
Thread Starter
Join Date: Oct 2006
Posts: 190
Sticky Speedo
Hey Guys, quick question.
When I accelerate through the full sweep my needle sticks at about 160, the jumps when i hit about 180-190km/h. Sometimes it will stick past 190, then jump to 230km/h, which is no good, i like to know when i am going past the "Ludicrus Speed" marker.
Is there anything i should lube? I think the speedo works with a pulse generator or something, so it's probably in the clock internals, but i don't want to start pulling that all apart. I might break some tamper seal or something.
Anybody else ever have this problem?
When I accelerate through the full sweep my needle sticks at about 160, the jumps when i hit about 180-190km/h. Sometimes it will stick past 190, then jump to 230km/h, which is no good, i like to know when i am going past the "Ludicrus Speed" marker.
Is there anything i should lube? I think the speedo works with a pulse generator or something, so it's probably in the clock internals, but i don't want to start pulling that all apart. I might break some tamper seal or something.
Anybody else ever have this problem?
Thread
Thread Starter
Forum
Replies
Last Post
