Reg/Rec problem...need help!
11-15-2009, 09:02 AM
#1
Senior Member
Superstock
Thread Starter
Join Date: Oct 2009
Location: Concord, NC
Posts: 344
Reg/Rec problem...need help!
Ok, so I ordered an R6 rectifier to install on the SH. It arrived yesterday and I started putting it in.
Apparently the order of the wires seems to have some importance, particularly with the red and green wires. If I plug them in one way, they blow the main fuse (a 30 amp one). If I plug them in the opposite, it doesn't blow the fuse, but it's also not charging the battery either.
If I plug the old unit back in, it works fine.
Any ideas????
The R6 unit I got was for a 97 to 02 model. Apparently it fit the R1 as well.
Help!
Apparently the order of the wires seems to have some importance, particularly with the red and green wires. If I plug them in one way, they blow the main fuse (a 30 amp one). If I plug them in the opposite, it doesn't blow the fuse, but it's also not charging the battery either.
If I plug the old unit back in, it works fine.
Any ideas????
The R6 unit I got was for a 97 to 02 model. Apparently it fit the R1 as well.
Help!
11-15-2009, 11:09 AM
#4
Senior Member
Superstock
Thread Starter
Join Date: Oct 2009
Location: Concord, NC
Posts: 344
Thanks guys. I had looked at the how-to thread. I just forgot which side the red and green were on. I think I also had forgotten the ground, because I went back and re-installed it, and it seems to be working fine now.
thanks for the input!
thanks for the input!
Thread
Thread Starter
Forum
Replies
Last Post
