Engine setup
#1
Jack of all Master of non
Superstock
Thread Starter
Join Date: May 2011
Location: Jacksonville,fl
Posts: 297
Engine setup
i am putting my engine back together and could you a piece of advice.
a few questions come to mind:
1. which cylinder fires first ( front or rear)
2. this engine is a 2-1 for the firing order right?
3. when the front cylinder fires what stroke is the rear cylinder on? is it the intake stroke?
4. when the front cylinder is on the power stroke the cam lobes face away from each other right?
a few questions come to mind:
1. which cylinder fires first ( front or rear)
2. this engine is a 2-1 for the firing order right?
3. when the front cylinder fires what stroke is the rear cylinder on? is it the intake stroke?
4. when the front cylinder is on the power stroke the cam lobes face away from each other right?
#2
Just put one together. It don't matter which. Then follow the instructions to get the other one set. There is a service manual in the knowledge base section of this forum. Find it. Download it. Read it.
Last edited by mboe794; 09-20-2011 at 07:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post
macworld
Modifications - Performance
12
03-17-2006 07:09 AM