Double banjo source
#1
Double banjo source
So after the other thread I am looking for a double banjo to add to my SS lines.
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
#2
My understanding is that Brembo master cylinders use a fine 10mm x 1.0 pitch thread and that Nissin/otherOEM's master cylinders use a coarse 10mm x 1.25 pitch thread
Banjo Bolts & Washers - OPPRACING Products
Banjo Bolts & Washers - OPPRACING Products
#3
What MC are you using.... pitch is different on some MC
So after the other thread I am looking for a double banjo to add to my SS lines.
This SS banjo bolt from Probolt is what buy most times for the Stock VTR MC which is M10x1.25
http://www.amazon.com/Stainless-Stee.../dp/B00AKOHLQW
Cheapy chrome Goodrich M10x1.0 like might be used on a Brembo MC
http://www.amazon.com/Goodridge-Banj.../dp/B000WJ2S22
SS double M10 x 1.0
http://www.amazon.com/s/ref=nb_sb_no...s=LSSBANJOD10F
Ti double m10x1.0
Amazon.com: Titanium Banjo Bolt Double M10 x (1.00mm) Gold: Automotive
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
This SS banjo bolt from Probolt is what buy most times for the Stock VTR MC which is M10x1.25
http://www.amazon.com/Stainless-Stee.../dp/B00AKOHLQW
Cheapy chrome Goodrich M10x1.0 like might be used on a Brembo MC
http://www.amazon.com/Goodridge-Banj.../dp/B000WJ2S22
SS double M10 x 1.0
http://www.amazon.com/s/ref=nb_sb_no...s=LSSBANJOD10F
Ti double m10x1.0
Amazon.com: Titanium Banjo Bolt Double M10 x (1.00mm) Gold: Automotive
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
#4
If you have a Stock MC and want a bleeder niple in the bolt yes that will work.
I use Stainless and no bleeder.
See other post for options;
I use Stainless and no bleeder.
See other post for options;
So after the other thread I am looking for a double banjo to add to my SS lines.
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
Having trouble finding one. What is the thread pitch? Will this fit?
Venhill Banjo Bolt Double Bleed Bleeder Chrome 10mm x 1 25 Coarse | eBay
I cant remember so if someone knows a good source let me know. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post