Coerce Front Fork Stabilizer Honda VTR1000F(SC36) Super Hawk/Firestorm
Who has put one of these on the forks of their Superhawk?
And did you notice a difference?

Did the search, Alot of info on others selling the stabilizers off their S-hawk.. Yet No opinions...

 

I have ridden a VTR with stock forks and without a brace... I know which my option is... The brand is irellevant to me...

 

Is there other manufactures?

 

Coerce and Superbrace is the two name one's... Then there are a couple of one's made by forum members... The end result is the same...

 

Thanks for the info..

 

I ran one for a couple of years (prior to switching to the 900RR forks) and wholeheartedly recommend it.

 

I'm with the other guys, it really doesn't matter who makes it but the stock front end on a SH will benefit from having a brace installed.

Also if you install one, make sure you do it right so you don't end up with the forks binding..... I wrote a how a little while back so you should be able to find it.

 

Thanks for the info gentlemen, Prior to the weather going to pot.. Had the S-hawk and the RC-51 over to US129.. It is cold and quite there.. Both bikes have had GMDcomputrack work and tune the suspension, both running the BT016s.. The S-hawk -I could feel it under hard braking.. Compared to the RC..
And this S-hawk, I have left looking stock- Even thou it ain't..

 

I use the Coerce on mine.....highly recommended....

 

That is how mine was for a long time, it looked stock but everything was reworked. Adding the fork brace really helped this set up both in handling and braking. The reason for this is, IMHO, the weak link in the front end is the lower triple clamp.

 

I hope that the fork braces bass4dude has in the works are available in the near future.