Step one? the factory Pro Ti 1.1 main jets only?
#1
Mad Max NO Squid!
Squid
Thread Starter
Join Date: Jun 2010
Location: Honolulu, Hawaii, 96789
Posts: 54
Step one? the factory Pro Ti 1.1 main jets only?
When using the factory Pro Ti 1.1 do you put the whole kit in or just the main jets and needles only or the whole kit?????
it may seem like a dumb question but it really never mentions rather you just install the main jet and needles and leave the rest of the kit un-installed or guess on the rest.
Or should you install the whole kit if so where does the needle position setting go to start?https://www.superhawkforum.com/forum...ons/icon11.gif
it may seem like a dumb question but it really never mentions rather you just install the main jet and needles and leave the rest of the kit un-installed or guess on the rest.
Or should you install the whole kit if so where does the needle position setting go to start?https://www.superhawkforum.com/forum...ons/icon11.gif
Last edited by skycam; 08-22-2010 at 07:53 PM. Reason: to make more clear
#2
The needles and jets have the profile matched to each other... Using stock needles and aftermarket jets are a good way of getting a headache...
And that's why the information never mentions installing only part of the kit... Because it's generally a bad idea...
And that's why the information never mentions installing only part of the kit... Because it's generally a bad idea...
Thread
Thread Starter
Forum
Replies
Last Post