Quick pair question so i can ride
12-29-2012, 11:15 AM
#1
Junior Member
Squid
Thread Starter
Join Date: Sep 2012
Posts: 11
Quick pair question so i can ride
Just performed pair removal and want to make sure I am supposed to cap every vent line connecting to the bottom of the air box. Also, can I cap where the front breather hose connects to the front of the engine at what I believe is the cylinder head cover? There is air coming out of that hose and also maybe a little oil or lubricant of some sort. Thanks
Last edited by 0317Hawk; 12-29-2012 at 11:22 AM.
12-29-2012, 09:01 PM
#2
Senior Member
Superstock
Join Date: Apr 2011
Location: Edwards AFB, CA
Posts: 491
The front nipples comming off of the valve covers need to be capped. Everything on the airbox minus the 2 breather hoses can be capped, If I remeber correctly. Pretty much everything that you had removed that has an opening needs to be capped and plugged. There is a write up in here. Just mske sure you follow it word for word, and down load the shop manual for the link on here, its a PDF. I didnt follow it word for word and ended up capping a nipple on the carbs that allowed a vaccume to occure and fuel would flow out of the carbs when I shut it down after a 5 second start.
Thread
Thread Starter
Forum
Replies
Last Post
98VTRrider
Technical Discussion
5
12-20-2011 12:33 PM
