Modifications - Performance Discuss aftermarket and DIY performance modifications

Front suspension mod info's / links

Thread Tools
 
Search this Thread
 
Old 12-12-2005, 09:08 AM
  #1  
Senior Member
Back Marker
Thread Starter
 
icebud's Avatar
 
Join Date: Apr 2005
Location: Montreal
Posts: 201
icebud
Front suspension mod info's / links

Hi guys!

Like many of us seems to be working on the same project: Replace/Upgrade our front suspension! I've think that it could be a good idea to share our information's about this!

So, here a couple of link about the subject, ok ok, this is from a VFR forum but the guys there are also very tricky. Just browse the "suspension" and "check this out" thread, there a lot of pictures and measurements about 929, RC51, GSX1000R and CBR1000RR front end:

http://www.vfrdiscussion.com/forum/i...449&hl=cbr1000

http://www.vfrdiscussion.com/forum/i...c=9898&hl=rc51

http://www.vfrdiscussion.com/forum/i...howtopic=10129

http://www.vfrdiscussion.com/forum/i...944&hl=cbr1000


Also some information's on Speedzilla forum ( peace to RC996 bike )

http://speedzilla.com/forums/showthr...9&page=1&pp=10


Some guide about setting and how to adjust suspension:

http://www.sportrider.com/tech/146_0006_susp/

http://www.sportrider.com/bikes/146_susp_settings/

http://www.gostar-racing.com/club/mo...ion_set-up.htm

http://www.vtwo.demon.co.uk/firestorm/steering.htm


Here is also some link for some aftermarket handlebars:

http://www.convertibars.com/

http://www.helibars.com/

http://www.apexleisure.co.uk/gillesvariobars.htm


Thus, the thread is start, if any of you have some other good link or info, please share them with us!

Cia

IceBud
icebud is offline  
Old 04-23-2007, 12:46 PM
  #2  
Seņor Miembro, Ay Caramba
SuperSport
 
Scooberhawk's Avatar
 
Join Date: May 2006
Location: a little north of DC
Posts: 562
Scooberhawk is on a distinguished road
Seemed like a good idea to !
Scooberhawk is offline  
Old 04-25-2007, 12:35 PM
  #3  
Senior Member
Superstock
Superstock
 
davidka's Avatar
 
Join Date: Apr 2007
Posts: 321
davidka is on a distinguished road
CBR 600 F3 forks?

I see lots of info for doing RC51, 929, and 954 fork swaps but what about using 600 F3 fork legs? This should be a pretty simple setup using the same triple trees (both are 41mm legs) and achieving better damping and adjustability. I know doing the other fork swaps gives better stiffness but that seems unnecessary on a street bike that is designed to flex in the first place.

Has anybody done an F3 front end?
davidka is offline  
Old 04-25-2007, 03:30 PM
  #4  
Senior Member
Superstock
 
pigwings's Avatar
 
Join Date: Dec 2004
Location: Independence, Oregon
Posts: 367
pigwings
Suspension Links

Originally Posted by icebud
Hi guys!
So, here a couple of links about the subject, .......<snip.......
Good info - thanks.
pigwings is offline  
Old 04-25-2007, 05:55 PM
  #5  
Administrator
World Champion
 
Hawkrider's Avatar
 
Join Date: Dec 2004
Location: Fulton, MO
Posts: 105,287
Hawkrider will become famous soon enoughHawkrider will become famous soon enough
The two forks are essentially the same. There is no advantage to the swap, except maybe slightly different spring rates (still progressive though) and slightly different damping.
Hawkrider is offline  
Old 04-25-2007, 06:07 PM
  #6  
Seņor Miembro, Ay Caramba
SuperSport
 
Scooberhawk's Avatar
 
Join Date: May 2006
Location: a little north of DC
Posts: 562
Scooberhawk is on a distinguished road
Prolly a good call, David. They have adjustable compression damping, too, don't they?
Scooberhawk is offline  
Old 04-25-2007, 06:31 PM
  #7  
Senior Member
SuperBike
 
JamieDaugherty's Avatar
 
Join Date: Aug 2005
Location: Fort Wayne, IN
Posts: 1,858
JamieDaugherty is on a distinguished road
No, the F3's do not have compression damping adjustment. They are the same as the VTR forks as far as adjustability is concerned. Swapping F3 forks will gain you nothing.
JamieDaugherty is offline  
Old 04-25-2007, 06:59 PM
  #8  
Seņor Miembro, Ay Caramba
SuperSport
 
Scooberhawk's Avatar
 
Join Date: May 2006
Location: a little north of DC
Posts: 562
Scooberhawk is on a distinguished road
Ah ha. Well, what makes the F3's different from the F2 forks? Cuz I think the F2 forks were cartridge forks also, better than the stock forks on my Hawk GT.
Scooberhawk is offline  
Old 04-25-2007, 07:18 PM
  #9  
Senior Member
SuperBike
 
JamieDaugherty's Avatar
 
Join Date: Aug 2005
Location: Fort Wayne, IN
Posts: 1,858
JamieDaugherty is on a distinguished road
Nope, only the 94 F2's were cartidge forks, all other years were damping rod type. The 94 F2 suspension is basically the same thing as the F3 stuff.
JamieDaugherty is offline  
Old 04-26-2007, 10:42 AM
  #10  
Senior Member
Superstock
Superstock
 
davidka's Avatar
 
Join Date: Apr 2007
Posts: 321
davidka is on a distinguished road
That's the info I was looking for. I guess it's a Race Tech valve/spring upgrade or all in on a RC51 front end then.
davidka is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JusWes
General Discussion
42
03-30-2013 05:49 AM
tucklo
Modifications - Performance
8
05-02-2007 03:55 PM
CNI Dawg
Knowledge Base
7
02-26-2007 05:09 AM
GoBlu
General Discussion
0
08-02-2006 08:20 AM
MrFurious29
Forum Feedback
3
07-15-2006 07:29 PM



Quick Reply: Front suspension mod info's / links



All times are GMT -7. The time now is 11:44 PM.


Top

© 2024 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.