Fork swap, rad relocation ?
Thread Starter
Senior Member
Superstock
Joined: Jul 2009
Posts: 348
From: Melbourne Australia
Fork swap, rad relocation ?
Quick question for those that have moved the radiators for clearance of the front rad hose,
did you position the horizontal connecting rad hose above the oil cooler ? below the oil cooler ? or in front of the oil cooler ?
at the moment I have removed the rad bolts, cut around 3/4 inch of the right & left hoses and pushed the rads back, but just wondering about final position !?
I have the hose above the oil cooler at present.
left side moved back easily, right side not moving back as easy, but I think I'm o.k,
did you position the horizontal connecting rad hose above the oil cooler ? below the oil cooler ? or in front of the oil cooler ?
at the moment I have removed the rad bolts, cut around 3/4 inch of the right & left hoses and pushed the rads back, but just wondering about final position !?
I have the hose above the oil cooler at present.
left side moved back easily, right side not moving back as easy, but I think I'm o.k,
Senior Member
SuperBike
Joined: Sep 2010
Posts: 1,987
From: Bisbee, AZ
Mine is on top, same as yours. It has been a while since I did the fork swap, but I don't remember any issues with the hoses and clamps.
You need to finish up and go get some bugs smashed on to that oil cooler, way too clean.
You need to finish up and go get some bugs smashed on to that oil cooler, way too clean.
Thread
Thread Starter
Forum
Replies
Last Post
