Brake rotor question about my FRANKENHAWK, anybody know?
08-21-2005, 12:52 PM
#1
Senior Member
MotoGP
Thread Starter
Join Date: Jan 2005
Location: Gainesville FLA.
Posts: 3,844
Brake rotor question about my FRANKENHAWK, anybody know?
Anybody know if the 6 hole Ducati rotors will fit our wheels? I just put on 954 triples with gsxr forks and an F3 wheel. It looks great and handles awesome but the gsxr has 320mm rotors and ours are 296mm. I really don't feel like dropping another 400 bucks on rotors and the Ducati ones look the same but I don't have one to measure so any help would be greatly appreciated.
08-22-2005, 04:17 PM
#2
Addicted to VTR!
Squid
Join Date: Jul 2005
Location: Mantignana (Italy)
Posts: 77
Re: Brake rotor question about my FRANKENHAWK, anybody know?
They will not fit!
There are differences in center hole diameter, bolt holes distance and bolt holes diameter. Probably also the offsett is different.
AFAIK the biggest disks you can apply (except transformation kit VTR specific) are the 310 mm of CBR 900 '98-'99 and CBR 1.100 XX. Also in this case you have to check offset.
Ciao
There are differences in center hole diameter, bolt holes distance and bolt holes diameter. Probably also the offsett is different.
AFAIK the biggest disks you can apply (except transformation kit VTR specific) are the 310 mm of CBR 900 '98-'99 and CBR 1.100 XX. Also in this case you have to check offset.
Ciao
08-22-2005, 05:22 PM
#3
Senior Member
MotoGP
Thread Starter
Join Date: Jan 2005
Location: Gainesville FLA.
Posts: 3,844
Re: Brake rotor question about my FRANKENHAWK, anybody know?
Thanks for the info, I just found out that the bolt holes for the Ducati are 80mm apart while the SH are 75mm so you are correct they won't work. As far as the size I have gsxr forks so I need 320mm and I'm not that worried about the offset I can always shim the calipers to fit.
Thread
Thread Starter
Forum
Replies
Last Post
HotStreetVTR
General Discussion
0
03-23-2005 09:17 AM
