Another RC51 Front End Conversion (Fork Swap)
08-28-2009, 10:13 AM
#31
Out of my mind, back in 5
MotoGP
Join Date: Nov 2006
Location: Skurup, Sweden
Posts: 6,109
Ok, that should cure any wet noodle tendancies from the shock... Are the height in the back stock?
I found that a slight rise in the rear and a bit of drop in front made the bike a bit more balanced after the front swap... Yeah I know the angle becomes a bit extreme... But for me it did the trick...
Altough I can't compare as now with another swing, the bike is rock solid in corners, stable at speed in a straight line and still flickable... I can safely say that the bike is ten times more capable than me... And I built the darned thing...
I found that a slight rise in the rear and a bit of drop in front made the bike a bit more balanced after the front swap... Yeah I know the angle becomes a bit extreme... But for me it did the trick...
Altough I can't compare as now with another swing, the bike is rock solid in corners, stable at speed in a straight line and still flickable... I can safely say that the bike is ten times more capable than me... And I built the darned thing...
11-27-2011, 09:25 PM
#35
Moderator
MotoGP
Thread Starter
Join Date: May 2005
Posts: 2,708
02-09-2012, 07:44 PM
#36
Junior Member
Squid
Join Date: Feb 2012
Posts: 11
rc51 fork swap
what triple clamps u using,the top n bottom from same model bike or a "mix" of different bikes,n what bearings n races needed.just loged in today.got an 02' n it wont finish the turns.got a eng.teardown to do,bent shift fork,hard to go into 2nd under power,n back cyl.has knocking,think its small end rod bearing.love the bike,worth all the trouble.yours looks great.miss ridn mine.
Thread
Thread Starter
Forum
Replies
Last Post
ff
Modifications - Performance
0
03-27-2008 09:20 AM
