Show me your forward-facing flush mount turn signals...
Thread Starter
Senior Member
SuperSport
Joined: Jul 2008
Posts: 987
From: San Diego, CA
Show me your forward-facing flush mount turn signals...
I got rid of my previous flush mounts because they were very hard to see from the front and I commute a lot on the bike.
I would still like something that mounts against the fairing though, nothing with a stem, sort of along these lines...
I would still like something that mounts against the fairing though, nothing with a stem, sort of along these lines...
Senior Member
Superstock
Joined: Jan 2008
Posts: 499
From: Kansas City
I've been thinking about switching similar to what you'e doing...but first, I have plans to mount some Radiantz signal strips up near the mirrors to get the attention from the front and keep that sleek look along the side.
Member
Squid
Joined: Feb 2009
Posts: 49
From: Glasgow Bonnie Scotland
FLASHERS
I am running these on my bike but i have now started using them as running lights looks **** hot in the dark.My next mod will be to put car side repeaters on my mirrors i have put a pic with this but this is b4 i was using them as running lights hope this helps
Senior Member
SuperSport
Joined: Dec 2008
Posts: 507
From: Arizona
Went with the Lockhart Phillips Flush Mount III Amber Smoked for about 20 bucks.
My thread about the sliders you can see different angles of the lights.
https://www.superhawkforum.com/forum...ad.php?t=17575
I have been tossing the idea around of converting them over to LED. they are plenty bright and you can see them from different angles.
My thread about the sliders you can see different angles of the lights.
https://www.superhawkforum.com/forum...ad.php?t=17575
I have been tossing the idea around of converting them over to LED. they are plenty bright and you can see them from different angles.
Member
Squid
Joined: Feb 2009
Posts: 49
From: Glasgow Bonnie Scotland
The vikings are not dead
Squid
Joined: Apr 2009
Posts: 33
From: Denmark
Last edited by VTRDenmark; May 4, 2009 at 10:01 AM. Reason: spelling !
Senior Member
Superstock
Joined: Jul 2008
Posts: 344
Senior Member
SuperBike
Joined: Nov 2007
Posts: 1,216
From: Westerly, RI
www.customled.com
You can buy the Lockhart Philips III through them, and they have a LED insert that they will put in for you, I forget the price.
You can buy the LP III for $13.99 elsewhere, buy their LED inserts for $54.95 and put them together yourself if you want to save a few dollars.
You can buy the Lockhart Philips III through them, and they have a LED insert that they will put in for you, I forget the price.
You can buy the LP III for $13.99 elsewhere, buy their LED inserts for $54.95 and put them together yourself if you want to save a few dollars.
Thread
Thread Starter
Forum
Replies
Last Post
johnclopp85
Technical Discussion
5
May 13, 2009 07:20 AM
CNI Dawg
Modifications - Cosmetic
1
Nov 7, 2005 10:37 AM
