Modifications - Cosmetic Discuss aftermarket and DIY cosmetic modifications

Mirror Ideas

Thread Tools
 
Search this Thread
 
Old Nov 23, 2009 | 06:59 PM
  #1  
txsuperhawk's Avatar
Thread Starter
Junior Member
Squid
 
Joined: Nov 2009
Posts: 18
From: San Antonio, TX
txsuperhawk is on a distinguished road
Mirror Ideas

I am 6'6" tall and fairly wide in the shoulders, I can not get my mirrors high or wide enough to see without ducking. I know I should run fast enough not to need them but in fender to bumper traffic they would be nice. Anyone changed out mirrors for better visability?
Old Nov 28, 2009 | 12:47 PM
  #2  
mhaisten's Avatar
Wrench Bender
Squid
 
Joined: Nov 2009
Posts: 96
From: Auburn, CA
mhaisten is on a distinguished road
Come on guys, please give up what you have done. I am also tired of looking at myself. I know someone has an easy fix.
Old Nov 28, 2009 | 12:59 PM
  #3  
the1bolton's Avatar
Member
Squid
 
Joined: Nov 2008
Posts: 65
the1bolton is on a distinguished road
I have been considering some mirror extenders; these genmar folks make some.

http://www.zianet.com/genmar/

I have a similar problem but not as extreme, as I pull in an elbow and move around a small bit and I can see behind through one mirror. I think just about everyone has some level of issues with the stock mirrors.

On another note, I used to love having my mirrors mounted to the handlebars on my first bike. Especially at stop lights I could turn the handle bars and sit straight up and watch the cars behind me in case one is approaching faster than I am comfortable with. You could consider bar-end mirrors.
Old Nov 28, 2009 | 01:40 PM
  #4  
lazn's Avatar
Senior Member
MotoGP
 
Joined: Mar 2007
Posts: 3,132
From: Phoenix, AZ
lazn is on a distinguished road
Some people put Yamaha mirrors on.. FZ1 I think it is.

Or mirror extenders are available on Ebay.
Old Nov 28, 2009 | 01:42 PM
  #5  
AngryOlaf's Avatar
Senior Member
Superstock
 
Joined: Sep 2009
Posts: 421
From: Woodland Hills, CA
AngryOlaf is on a distinguished road
There are also a bunch of extenders on eBay... not sure how good they work but they look like they'd push the mirrors out at least an inch or so.
Old Nov 28, 2009 | 02:13 PM
  #6  
NAVY8TR's Avatar
Senior Member
Back Marker
 
Joined: Dec 2008
Posts: 226
From: Corpus Christi, TX
NAVY8TR is on a distinguished road
Originally Posted by the1bolton
I have a similar problem but not as extreme, as I pull in an elbow and move around a small bit and I can see behind through one mirror. I think just about everyone has some level of issues with the stock mirrors.
I am in this boat, I'm only 5'7" and can see fine when i tuck in a elbow. I have considered "pig spotters" to make the bike more sleek. they are sooo expensive though and haven't brought myself to do it yet...
Old Nov 28, 2009 | 02:38 PM
  #7  
ripvanwinkle's Avatar
aka sirch345. vtr1000.org
Back Marker
 
Joined: May 2006
Posts: 100
From: UK
ripvanwinkle is on a distinguished road
Probably a bit extreme for some, but I like the set-up on this bike, a rear facing camera

http://cgi.ebay.co.uk/HONDA-VTR1000-...item1e595319c0
Old Nov 28, 2009 | 08:20 PM
  #8  
inderocker's Avatar
Moderator
MotoGP
 
Joined: May 2005
Posts: 2,708
inderocker is an unknown quantity at this point
I've mounted some mirror extenders on my VTR and found they really didn't help too much. They moved the mirror up more than out... instead of seeing my elbows I was seeing my shoulders.
Old Nov 29, 2009 | 04:45 PM
  #9  
gixxerjohn's Avatar
Senior Member
Back Marker
 
Joined: Nov 2009
Posts: 133
gixxerjohn is on a distinguished road
you can use r6/r1 mirrors on the hawk, has the same bolt spacing, so they might help some ppl out.....
Old Nov 29, 2009 | 05:46 PM
  #10  
dshakes's Avatar
Senior Member
Superstock
 
Joined: Apr 2009
Posts: 395
From: Columbus, OH
dshakes is on a distinguished road
ditched my mirrors. keeps you always looking and aware.
Old Nov 29, 2009 | 05:59 PM
  #11  
Hawkrider's Avatar
Administrator
World Champion
 
Joined: Dec 2004
Posts: 105,287
From: Fulton, MO
Hawkrider will become famous soon enoughHawkrider will become famous soon enough
Wayyyy back in the day a guy named Don Herve made a batch of mirror extenders. I have a set. You might be able to get something like this made, or better yet have a batch made and sell them on this forum!
Attached Thumbnails Mirror Ideas-dsc00599.jpg   Mirror Ideas-dsc00600.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
saxman
Technical Discussion
7
Jan 29, 2007 06:14 AM
azhawk1
Modifications - Cosmetic
23
Dec 23, 2006 10:22 AM
98vtr1000
Modifications - Performance
8
Oct 19, 2006 01:19 PM
AZZKIKER
General Discussion
11
Aug 30, 2006 03:58 PM
2Phaast
General Discussion
7
Jul 2, 2006 06:48 PM




All times are GMT -7. The time now is 02:34 AM.


Top

© 2026 MH Sub I, LLC dba Internet Brands



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.