A frenchie's VTR
Thread Starter
Junior Member
Squid
Joined: Nov 2011
Posts: 12
A frenchie's VTR
Hello,
I'm french (excuse me for my awful english ...)
I owned this bike for years but i just found some time to do a paint job (done with spray cans !!) and show it.
A dyno test was offered this week end because i bought a set of tires so i did it unless it's a stock engine.
Mod list i've done for now:
- manual cct's (next week)
- 19l tank with vfr fuel sensor and a xlv 1000 fuel tap (same thread as the new fuel tank)
- tps @ 500Ohms
- braided lines
- 2001 cluster modded (I'm preparing a full customed 600 cbr cluster but it takes time ...)
- black windshield
- mirrors with leds
- warning mod
- some rizoma's parts for cosmetics
For now I want a fully working bike just like a new one !
I'm french (excuse me for my awful english ...)
I owned this bike for years but i just found some time to do a paint job (done with spray cans !!) and show it.
A dyno test was offered this week end because i bought a set of tires so i did it unless it's a stock engine.
Mod list i've done for now:
- manual cct's (next week)
- 19l tank with vfr fuel sensor and a xlv 1000 fuel tap (same thread as the new fuel tank)
- tps @ 500Ohms
- braided lines
- 2001 cluster modded (I'm preparing a full customed 600 cbr cluster but it takes time ...)
- black windshield
- mirrors with leds
- warning mod
- some rizoma's parts for cosmetics
For now I want a fully working bike just like a new one !
Last edited by fatom2k; Jun 9, 2014 at 01:25 PM.
Thread Starter
Junior Member
Squid
Joined: Nov 2011
Posts: 12
Hello,
Thank's for your post replies.
Concerning the paint job, I used a peugeot red lucifer (mokq .. i love that color
) and 2k ( 2 components base and hardener) clearcoat spray cans that looks very glossy/shiny.
It applies like the spraygun but you don't need all the tools. The best paint job i've ever done. Of course it isn't super perfect job but it's really satisfying since it has been done in my cave in only a week end.
For the dyno test, i did it like a 'before' cleaning and tune my carbs.
The engine, carbs and mufflers are stock. The only mod, for the moment, is a k&n air filter.
Thank's for your post replies.
Concerning the paint job, I used a peugeot red lucifer (mokq .. i love that color
) and 2k ( 2 components base and hardener) clearcoat spray cans that looks very glossy/shiny.It applies like the spraygun but you don't need all the tools. The best paint job i've ever done. Of course it isn't super perfect job but it's really satisfying since it has been done in my cave in only a week end.
For the dyno test, i did it like a 'before' cleaning and tune my carbs.
The engine, carbs and mufflers are stock. The only mod, for the moment, is a k&n air filter.
Thread Starter
Junior Member
Squid
Joined: Nov 2011
Posts: 12
Hello.
Just a message to show off the thing i'm working on ... just for fun, of course
Not finished but fairly advanced.
backlight and grafics are fully customizable.
Then I will add some more features like turn-by-turn navigation directed by
the phone ...
See you soon !
Just a message to show off the thing i'm working on ... just for fun, of course
Not finished but fairly advanced.
backlight and grafics are fully customizable.
Then I will add some more features like turn-by-turn navigation directed by
the phone ...
See you soon !
Last edited by fatom2k; May 6, 2014 at 09:57 AM.
Thread Starter
Junior Member
Squid
Joined: Nov 2011
Posts: 12
Here is my week end mod ... warning installation.
made with 2 diodes (1N4007) and a modded vfr 800 handlebar control.
Easy mod when you already left off the front fairings ...
made with 2 diodes (1N4007) and a modded vfr 800 handlebar control.
Easy mod when you already left off the front fairings ...
Last edited by fatom2k; Jun 9, 2014 at 10:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
