Austin/San Antonio/New Braunfels Ride
Senior Member
SuperBike
Joined: Oct 2008
Posts: 2,188
From: New Braunfels, Texas
Yes, engine cowling fasteners are usually 1/4 turn fasteners. The wing upper skin is a structural panel on the wing that is held in place with 8/32 screws.
Do you fly? if so, you can fly on down some morning...airport code E70.
Senior Member
SuperBike
Joined: Oct 2008
Posts: 2,188
From: New Braunfels, Texas
Okay okay, so the engineer will have to find a way to make this work for KD here...
We might be able to buy another set of passenger pegs/brackets, then we can grind off all passenger carrying related crap, make "shorty" brackets back there... and load it, and the stockers with LED's, then you can have hidden LED turn signals all the time... clean and shiny!
OR I think we can work a quick disconnect into it (maybe)... and work a quick disconnect to the LP lights that you currently have (definitely an undertaking)... so then you can choose which combination of turns to use...
Just a thought...
Where do you have the drill press and the vice at, house or hangar?
We might be able to buy another set of passenger pegs/brackets, then we can grind off all passenger carrying related crap, make "shorty" brackets back there... and load it, and the stockers with LED's, then you can have hidden LED turn signals all the time... clean and shiny!
OR I think we can work a quick disconnect into it (maybe)... and work a quick disconnect to the LP lights that you currently have (definitely an undertaking)... so then you can choose which combination of turns to use...
Just a thought...
Where do you have the drill press and the vice at, house or hangar?
Yep, we can dream up something for sure.
The drill press and vise are at the hangar. You can come out anyday you are off and use them.
Senior Member
MotoGP
Joined: Sep 2006
Posts: 4,138
From: Austin, Tx
Hat's off for a short ride after Just Nick got his jets sorted out. We blasted out for a lunch with TxSuperChicken before he goes back to Iraq for a few months.
The run up 734 is off the stop for about 7-8 miles then you stop again. Gives a great chance to roll on and see what the carbs are doing. The farther north you get the traffic thins out.
Nick can fill everybody in on the jet sizes he used and what we found when we got back to my shop. Thanks for the ride, Nick. Good job.
The run up 734 is off the stop for about 7-8 miles then you stop again. Gives a great chance to roll on and see what the carbs are doing. The farther north you get the traffic thins out.
Nick can fill everybody in on the jet sizes he used and what we found when we got back to my shop. Thanks for the ride, Nick. Good job.
Who are you?
SuperSport
Joined: Aug 2009
Posts: 731
From: Las Vegas, NV
178/180 mains 45 pilots needles on second from bottom clip. We were mainly riding at 80-90 mph, and I was keeping the RPM's up until we reached said speeds. We found the plug showing that, at least the front, the mixture was quite lean. So I shall probably be bumping the mains up to a 180/185 combo. Doug, just let me know when you have time. We can install your jet kit and then swap out my jets.
Thread Starter
996 new guy
Superstock
Joined: Jul 2009
Posts: 300
From: Universal city, Texas
Sounds like you boys had fun...
KD- sounds good on the hangar... possibly Sunday, just depends on a few factors. Brandon is more than likely going to get the 2008 R6, only 5000 cash... not a bad deal.
KD- sounds good on the hangar... possibly Sunday, just depends on a few factors. Brandon is more than likely going to get the 2008 R6, only 5000 cash... not a bad deal.
Senior Member
Back Marker
Joined: Apr 2009
Posts: 181
From: San Antonio, Tx.
Sorry to hear about your arm Doug. Quess I've missed some of the post been working in Houston all last week. For the record Moonster doesn't own a ninja. Hey Fire Rescue, also sorry your friend totalled his bike.
Thread Starter
996 new guy
Superstock
Joined: Jul 2009
Posts: 300
From: Universal city, Texas
Don't feel too bad about his totalled bike, because...
-He got a year newer bike
-His insurance went down
-He almost paid off the ninja with the insurance $ left over...
This wreck actually put him on top (who would have guessed)
Senior Member
SuperBike
Joined: Oct 2008
Posts: 2,188
From: New Braunfels, Texas
Thread Starter
996 new guy
Superstock
Joined: Jul 2009
Posts: 300
From: Universal city, Texas
I think that if I have 2 Doug's hanging over my shoulder telling me how to do the CCT's I think I might be able to manage LOL... KD will be sitting in the background asking "how many pilots does it take to change a... ?" lol
Senior Member
SuperBike
Joined: Oct 2008
Posts: 2,188
From: New Braunfels, Texas
Who are you?
SuperSport
Joined: Aug 2009
Posts: 731
From: Las Vegas, NV
Do any of you guys know someone who would be good for flywheel lightening? One of these days I wanna shed some weight off the flywheel, just because that's a bunch of extra weight that doesn't need to be there.
Thread Starter
996 new guy
Superstock
Joined: Jul 2009
Posts: 300
From: Universal city, Texas
well ummm... I don't, and seeing that noone else put up a reply I don't think they do either... Ill get you a number for a motorcycle shop I work with on occasion... I'll PM it to ya...
Thread
Thread Starter
Forum
Replies
Last Post
